The Luma 40 comes on a simple base for mounting on an optical breadboard. It has four optical ports permitting measurement of fluorescence at 90 degrees to the excitation on either side of the excitation beam. Use the Luma 40 for normal temperature ranges of -15 °C to +105 °C. Add a windowed jacket, purge with dry gas and run the temperature down to at least -40 °C. Purchase the extended temperature option and extend the range up to +150 °C or down to -50 °C. Fluorescence is sensitive to temperature and reliable measurements require the precise temperature control of the Luma 40. Alternatively, take advantage of the additional optical ports and also use the Luma 40 when additional access at 90 degrees is required for photochemical studies. Operate the TC 1/Single Temperature Controller using the menu button, control via program T-APPor use the simple text commands of the TC 1/Single to write your own control program. Luma 40 是在一个简单的基础上安装在光学面包板上。它有四个光学端口, 允许测量在90度的荧光激发在激发光束的两侧。对于-15°c 至 + 105°c 的常温范围, 请使用 luma 40。加入一个风夹克, 用干气清洗, 并将温度降至-40°c。购买扩展温度选项, 并将范围扩展到 + 150°c 或-50°c。荧光对温度敏感, 可靠的测量需要对 luma 40 进行精确的温度控制。或者, 利用额外的光学端口, 并使用 luma 40 时, 需要额外的90度的光化学研究。使用菜单按钮操作 tc 半温度控制器, 通过程序 t-app 进行控制, 或使用 tc 教数的简单文本命令编写您自己的控制程序。
Product Features产品特点
Four optical ports四个光学端口
Rapid, precise temperature control快速、精确的温度控制
Optional extended temperature range 可选的扩展温度范围
Windowed jacket available for temperature extremes 可用于极端温度的风装夹克
Variable speed magnetic stirring 变速磁搅拌
Dry gas purge for work at low temperature 低温工作用干气净化
Base and post for mounting on an optical breadboard 安装在光学面包板上的底座和立柱
Probe input for sample temperature 样品温度的探头输入
NIST-traceable temperature calibration nist 可追溯温度校准
技术参数：
