Incremental rotary encoder / optical 180 – 512 CPR | E8P 增量式旋转编码器/光180 – 512 | e8p CPR
Characteristics
特点
Type:
类型：
incremental
增量
Technology:
技术：
optical
光学
Description
描述
The E8P provides mounting holes for two #4-40, length .250″ screws or two M2.5x.45mm, length 6mm screws on a 0.75″ diameter bolt circle. When mounting holes are not available, an option with a transfer adhesive pre-applied to the base is available. A centering tool is provided to center the base to the motor shaft during installation. The code wheel pushes on by hand using a spacer tool to set the gap in one step.
的e8p提供两# 4-40，长度安装孔。250“螺丝或两m2.5x.45mm，长6mm螺丝在0.75“直径螺栓圆。当安装孔不可用时，可以使用一个带有转印粘合胶的选项。在安装过程中，在安装过程中向中心向中心提供了一个中心的工具。在一个步骤中，用一个间隔的工具来设置这个间隙，这个代码轮用手推。
The cover snaps on to complete the assembly in seconds. Maximum noise immunity is achieved when the differential receiver is terminated with a 150 Ω resistor in series with a .0047 μF capacitor placed across each differential pair. The capacitor simply conserves power. Otherwise power consumption would increase by approximately 20 mA per pair, or 40 mA for 2 pairs.
该外壳能在几秒钟内完成装配。最大噪声免疫力达到时，差分接收器与一系列150Ω电阻终止。0047μμF的电容放置在每个差分对。电容器简单节省功耗。否则，电力消耗将增加约20毫安每对，或40对2对。
Incremental rotary encoder / optical 180 – 512 CPR | E8P 增量式旋转编码器/光180 – 512 | e8p CPR
