The Single Range Tritium Signal Processor is used to measure the amount of tritium directly in line of a process loop in real time and transmit a 0 – 10V output signal The unique small footprint detector head has the ability to handle up to 150 psig. It is leaktight and can operate at elevated temperatures. Up to 10 transmitters may be powered by one low cost power supply making this the most cost effective solution for a process with many detection locations.
采用单量程氚信号处理器实时测量过程回路中的氚量, 并传输 0-10V 输出信号, 独特的小足迹检测头具有处理多达 150 psig 的能力。它是 leaktight 的, 可以在高温下操作。多达10台发射机可能由一个低成本电源供电, 这是一个具有许多检测位置的过程中最经济划算的解决方案。
特征
直接内工艺线安装
低灵敏度为1µCi/立方米
150 Psig 压力容器
操作温度高于100°c
1×10-9 泄漏
0-10 V 输出, 用于集成到数据系统中
用户可选择的规模多达1万个单位
低成本
Specifications
| Detection Sensitivity with 1000 cc Detector | 1 µCi/m3 |
| Detection Sensitivity with 10 cc Detector | 1mCi/m3 |
| Detection Range with 1000 cc Detector | 0 to 10 Ci/m3 |
| Detection Range with 10 cc Detector | 0 to pure tritium |
| Measurement Steps with 1000 cc Detector | 10,000 steps |
| Measurement Steps with 10 cc Detector | 10,000 steps |
| Flow Rates | 2000 cc/s |
| Flow Rates | 1000 cc/s |
| Operating Pressure | Vacuum to 150 psig |
| Operating Temperature | 15 °C to 200 °C |
| Operating Humidity | 0% – 95% Relative Humidity |
| Leak Tightness | less than1x10-9 atm-cc/s He |
| Temperature Offset | Under 1 mCi/°C |
| Gamma Offset | 0.1 Ci/m3 per 1 R/h gamma fieldLinear response from 10-3 R/h to 102 R/h |
| Tritium Recovery | Chamber bakeable up to 350°C |
| Tritium Wetted Parts | 316L Stainless Steel, High density Ceramic |
| Fittings | VCR8 |
| Instrument Response Time | less than 10 s |
| Analogue Output | 0 – 10 V |
| Compliance | DOE Tritium Monitor Standard Rev 4 June 1999 ISO 9001 |
| Power Requirements | 135 VDC floating from ground, 0.1 A |
| Dimensions with 1000 cc Detector | 4.5″ diameter x 15″ length |
| Dimensions with 10 cc Detector | 3″ diameter x 15″ length |