Tyne Engineering’s Response Time Monitor can be used for critical or safety-related actuator response monitoring or as a delay-on timer. An example application is for testing the response time of the vent panel opening in the Power House Emergency Venting System in Nuclear Power Plants.
Tyne的响应时间监测可用于关键或与安全有关的执行器响应监视或作为延迟计时器。实例应用于核电站应急泄放系统中的通风板开口响应时间的测试。特征
6各自的渠道
成熟的硬件门逻辑设计, 不涉及可编程设备, 也没有软件。
每6个响应时间监视器都以数字形式显示。每个通道都有用于运行时间和状态指示灯指示器的数字显示。
具有状态指示器的冗余电源。
可通过数字 BCD 开关设置报警时间。
Specifications
Timing Resolution | 0.01S (10mS) |
Timing Accuracy | 0.01S(10mS) |
EMC Qualification | IEC 61000-4-2, Electrical Discharge Requirements
IEC 61000-4-3, Radiated Electromagnetic Field Requirement IEC 61000-4-4, Electrical Fast Transient/Burst Requirements IEC 61000-4-5, Surge Withstand IEC 61000-4-6, Conducted RF Immunity IEC 61000-4-8, Magnetic Field Immunity Test IEC 61000-4-11, Voltage Dip, Dropouts, interrupts and voltage |
Number of Channels: | 6 |
Mounting | Panel Mount, Overall dimension: 7” height X 13.5” width X 10” depth |
Control Contacts (Alarm) | Dry NO contact, Contact rating 0.5/48VDC. |
Input Contacts (Start/Stop/Reset) | Dry contacts, Contact Rating: 0.1A @12VDC. |
Power Supply | 120VAC ± 10%, 60Hz ± 2Hz. |
Power Consumption | <24VA. |
Timing aging | ±0.05mS per year in 10-second range (±5ppm/Year Frequency aging Crystal used for timing) |
Range | 0-99.99S |
Alarm Setting | 1-99S, with 1 Second step. |
Operating Temperature | 10-50 °C |
Operating Humidity | Up to 90% |