Notching machine max. 80 mm | EHA 开槽机最大80毫米| EHA
Description
描述
The electro-hydraulic notching unit type EHA can notch the lateral profile of 25 mm double standing seam plates to prepare them for installation. Profiles prepared with machine type EHA are used as the lower and upper seam ends of roofs, dormers, facades and parapets for various applications, such as eaves and roof inflection points, channels, single pitch roofs, façade bases, faceplates, verge flashing and window lintels.
液压开槽单元型EHA可以缺口25毫米双立接缝板为安装准备的横向分布。机械式EHA准备配置文件用于上下的屋顶、天窗缝两端，各种应用的外墙和护栏，如屋檐、屋顶的拐点，通道，单坡屋顶，足总çADE基地、面板、边缘闪烁，窗过梁。
The EHA can be used to machine both parallel and oblique or conical plates. The steps to notch, to shape and to fold back are completed within a minute. The EHA is equipped with segmented rails in the upper beam, the bending beam and supporting table. This permits processing of plates with a width ranging from 300mm to 800mm, as well as fold-backs on rhombic plates, shingles for mirrored coverings and coffered roof slabs. The notching and fold-back width and angle are completely adjustable. With the short plate clamping unit, extremely short plates may be processed. You may work from the right to the left and vice versa, from the left to the right.
EHA可用于机平行和斜形或锥形板。在一分钟内完成了切口、形状和折叠的步骤。EHA配备分段的铁轨在上横梁、弯曲梁和支撑台。这允许处理板宽度从300mm到800mm，以及折叠背菱形板，镜像的覆盖和格子屋面板瓦。开槽和折叠的宽度和角度是完全可调。与短板夹紧单元，极短板可以处理。你可以从左，反之亦然，从左到右的工作。
Notching machine max. 80 mm | EHA 开槽机最大80毫米| EHA
