UV11-3

硕士邦德UV14 – 3是一个新的组件，灵活，紫外线粘接，密封，并与被最容易被传统的溶剂可移动方便的功能固化聚合物涂层系统。 这是一个100％反应，在常温下不含有任何溶剂或其他挥发性物质中等粘度液体。 当暴露在紫外线光源，硕士邦德聚合物系统UV14 – 3治疗作为一种耐用，坚韧，不黄变系统，可作为粘合剂，密封剂和涂料。 UV14 – 3还具有优良的电绝缘性能。 吸收紫外线的能量最大发生在250-365纳米范围内进行。 该固化涂料，粘合剂和密封剂可用于在-60 ° F至+250 F.极宽的温度范围 与许多其他商用UV固化产品，硕士邦德聚合物系统UV14 – 3不氧抑制和展品甚至在空气存在的环境温度下固化速度快刻意。 主键聚合物系统UV14 – 3是可以治愈的切片厚度在更大（最高为1 / 8英寸深）比大多数传统的紫外线型系统，利用各种电子和光电电子灌封和封装应用的价值了。 这种性能特点是由于其独特有效的催化剂体系。 另一个UV14 – 3值得注意的财产是其高度的灵活性，赋予优良的震动和抗冲击性能以及卓越的能力承受热循环和热冲击。 最重要的是，UV14 – 3是最容易攻击使其成为理想的选择当紫外线系统必须易于去除溶剂。 硕士邦德聚合物系统UV14 – 3是可以治愈后，在很短的时间类型的紫外线灯，灯的距离从UV14 – 3面，对UV14 – 3部分要使用厚度等不同时期典型的治愈200瓦特/英寸中压汞蒸气灯建议。 固化线速度高达500ft./minute越来越高已经取得的UV14 – 3聚合物薄膜系统。 无溶剂或其他挥发性物质被释放在固化过程。 UV14 – 3提供了出色的耐用性，韧性和抗热震性以及优异的附着力，以一个与要容易，例如丙酮，二甲苯和MEK溶剂去除能力，结合各种基材等储存稳定性的理想组合主系统是债券聚合物在室温下6个月的原，未开封的容器。

Master Bond UV14-3 is a new one component, flexible, UV curable polymer system for bonding, sealing and coating with the convenient feature of being readily removable by most conventional solvents. It is a 100% reactive, moderate viscosity liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a UV light source, Master Bond Polymer System UV14-3 cures as a durable, tough, non-yellowing system which can be used as an adhesive, sealant and coating. UV14-3 also possesses excellent electrical insulation properties. Maximum absorption of UV energy takes place in the 250-365 nanometer range. The cured coatings, adhesives and sealants can be used over the exceptionally wide temperature range of -60°F to +250F. Unlike many other commercially available UV curing products, the Master Bond Polymer System UV14-3 is not oxygen inhibited and exhibits a desirably fast curing rate at ambient temperatures even in the presence of air. The Master Bond Polymer System UV14-3 can be cured in much greater section thickness (up to 1/8 inch deep) compared to most conventional UV type systems, making it of value for various electronic and opto-electronic potting and encapsulation applications. This performance characteristic is due to its uniquely effective catalyst system. Another noteworthy property of the UV14-3 is its high flexibility which imparts excellent vibration and shock resistance as well as superior ability to withstand thermal cycling and thermal shock. Most importantly, UV14-3 is readily attacked by most solvents making it the ideal selection when the UV system must be easily removed. Master Bond Polymer System UV14-3 can be cured in very short time periods depending upon type of UV lamp, distance of the lamp from the surface of the UV14-3, thickness of the section of the UV14-3 to be used, etc. Typical cure 200 watt/inch medium pressure mercury vapor lamps are recommended. Curing line speeds as high as 500ft./minute and more have been obtained for thin films of the UV14-3 polymer system. No solvents or other volatiles are released during the curing process. UV14-3 offers the desirable combination of outstanding durability, toughness and thermal shock resistance as well as excellent adhesion to a variety of substrates combined with the ability to be easily removed by solvents such as acetone, xylene and MEK, etc. The storage stability of the Master Bond Polymer System is 6 months at room temperature in the original, unopened containers.