FL901S2

硕士邦德FL901S聚合物系统是一种高性能的银填充不支持的环氧树脂基胶粘剂薄膜，提供出色的性能特点，并且不需要冷藏冷冻虽然是建议最大的货架寿命。 这个专门开发的一个组件的制定具有卓越的导电性，优越的机械强度，加上双方相似，不同基材粘接性能优良。 另外一个这个银导电膜吸引力的特点是能够治愈如1小时适宜的温度迅速在250 ° F（125 ° C）30-40分钟或在300 ° F（150 ° C）。 标准厚度为3密耳，虽然其他厚度可供选择。 这部电影过程中很容易和挤压粘结的是最小的。 硕士邦德FL901S拥有极宽的温度范围从-100 ° F至400 ° F。优良的导电性 即使在高温300 ° C的重量损失小于0.70％。 在室温下具有硕士邦德FL901S小于2毫低体积电阻率以及优良的热大于10 BTU•在/平方英尺•小时•° F.电导率 它可用于粘接到基板电子元件以及在EMI / RFI屏蔽，需要申请。 硕士邦德FL901S复膜胶提供了方便方便适用，随着高性能配置在专业电子应用所需的非混合系统。 硕士邦德FL901S也可根据要求预制形状。 此外，硕士邦德的电影可以直接申请上提供的部件，并返回给最终用户进行组装。

Master Bond FL901S Polymer System is a high performance silver filled unsupported epoxy resin based adhesive film which offers outstanding performance characteristics and does not require refrigerated storage although refrigeration is recommended to maximize the shelf life. This specially developed one component formulation features outstanding electrical conductivity, superior mechanical strength plus excellent adhesive properties to both similar and dissimilar substrates. An additional attractive characteristic of this silver conductive film is its ability to cure quickly at moderate temperatures e.g. 1 hour at 250°F (125°C) or 30-40 minutes at 300°F (150°C). The standard thickness is 3 mils, although other thicknesses are available. The film processes very easily and squeeze out during bonding is minimal. Master Bond FL901S has excellent electrical conductivity over an exceptionally wide temperature range from -100°F to 400°F. Even at elevated temperatures of 300°C the weight loss is less than 0.70%. At room temperature Master Bond FL901S features a low volume resistivity of less than 2 milliohms as well as an excellent thermally conductivity of greater than 10 BTU•in/ft²•hr•°F. It can be used for bonding electronic components onto substrates as well as for applications where EMI/RFI shielding is needed. Master Bond FL901S film adhesive offers the convenience of easy to apply non-mix system along with the high performance profile required in specialty electronic applications. Master Bond FL901S is also available in preformed shapes upon request. Additionally, Master Bond can apply the film directly onto parts supplied and return them to the end user for assembly.