Mity Mite Back Pressure Regulator

Port Sizes:	1/4″
Typical Pressure Ranges:	0 – 400 psi 0 – 2000 psi 0 – 3000 psi
Key Applications:	Mity Mite Replacement Reservoir Core Analysis

 

Equilibar back pressure regulators are an excellent candidate for customers using dome-loaded back pressure regulators (BPR’s) such as the Mity-Mite. The Mity-Mite BPR is an excellent control valve and has many successful applications. However, the Equilibar® back pressure regulator offers several distinct advantages over the traditional Mity Mite design: equilibar 背压调节器是使用圆顶背压调节器 (bpr) (如 men-mite) 的客户的绝佳选择。men-mite bpr 是一个优秀的控制阀, 有许多成功的应用。然而, 与传统的 mity mite 设计相比, equilibalib®背压调节器具有几个明显的优势:

• Through the use of Kalrez FFKM o-rings, the Equilibar Research Series regulators can operate up to 300C and can be cycled repeatedly without leaks 通过使用 kalrez ffkm o 形圈, equilibar 研究系列调节器可以运行高达 300C, 并且可以在没有泄漏的情况下反复循环
• Standard designs available to 6000 and 10,000 psig 标准设计可容纳6000和 10, 000 psig
• Low dead-volume (approximately 0.2 ml) using 1/16″ HPLC tube fittings 低死量 (约0.2 毫升), 使用半 “hplc 管件
• Wide variety of diaphragms available (PTFE, PEEK, SS316L, Hastelloy C276, Polyimide) 提供多种隔膜 (聚四氟乙烯、peek、ss316l、hastelloy c276、聚酰亚胺)
• Improved precision, even with two-phase flow 即使采用两相流, 也能提高精度
• Equilibar BPRs are available in Hastelloy C and exotic allows such as titanium, zirconium, and PEEK equilibar bpr 在 hastelloy c 和异国情调的允许, 如钛, 锆, 和 peek
• BPRs are typically in stock for shipment within one week, bpr 通常有库存, 可在一周内装运

While the Mity-Mite and the Equilibar back pressure regulators work in a fundamentally similar way, the unique design of the Equilibar gives it much more sensitivity, especially in the low to medium pressure range. Because the Equilibar diaphragm is thinner and more supple than the Mity Mite, it can be used at very low pressures (less than 1 psig, or in the millibar range). Replacement diaphragms and other spare parts for Equilibar BPR’s are available in as little as 24 hours. 虽然 mig-mite 和 equilibar 背压调节器的工作方式基本相似, 但 equilibar 独特的设计使其具有更高的灵敏度, 尤其是在中低压范围内。由于 equibar 隔膜比 mity mite 更薄、更柔软, 因此可以在非常低的压力下使用 (小于 1 psig, 或在毫巴范围内)。equibibar bpr 的更换隔膜和其他备件仅在24小时内提供。

View Fullscreen