GP 系列High Pressure Electronic Pressure Regulator 高压电子压力调节器

photo of Equilibar GP Series Electronic Pressure Regulator

Port Sizes:
1/8″
Typical Pressure Ranges:
0 – 500 psi0 – 750 psi0 – 1000 psi
Key Applications:
  • Pilot regulator for an Equilibar®  back pressure regulator with true 1:1 ratio control without any PID tuning or complicated installations.

The GP series control valve is an electronic pressure regulator designed to precisely control the pressure of gaseous media proportional to an electronic signal in pressure ranges up to 1000 psig (69 bar(g)). gp 系列控制阀是一种电子压力调节器, 用于精确控制与电子信号成比例的气体介质在高达 1000 psig (69 bar (g)) 的压力范围内的压力压力。

The GP series can be teamed with a variety of one-to-one ratio high pressure volume boosters for even greater flow. When using avolume booster, the GP2 can be used to achieve higher accuracy by compensating for the hysteresis of the mechanical pilot operatedregulator. GP series product comes with a monitor output signal. This output is an electrical signal originating from the internal sensor used in the control circuit of the GP1 valve. On GP2 units, this signal originates from the external transducer. This allows the system parameters to be monitored and provides a signal for data acquisition needs. The output of this signal can be configured to either 0-10Vdc or 4-20mA. gp 系列可以与各种一对一比高压体积助推器配合, 以获得更大的流量。当使用 avolume 助推器时, gp2 可通过补偿机械先导操作调节器的滞后性来实现更高的精度。gp 系列产品配有显示器输出信号。此输出是源自 gp1 阀门控制电路中使用的内部传感器的电信号。在 gp2 单元上, 此信号来自外部传感器。这使得系统参数可以被监控, 并为数据采集需求提供信号。此信号的输出可以配置为0-10vdc 或4-20ma。

• Precision pressure control from vacuum to 1000 psig without the need for a ratio amplifier
• Consumes no air in steady state
• External sensor closed loop option available
• Fast, accurate, and precise high pressure control of media
• Mounts in any position

·从真空到 1000 psig 的精确压力控制, 无需比例放大器
·在稳定状态下不消耗空气
·提供外部传感器闭环选项
·快速、准确、精确的介质高压控制
·安装在任何位置

View Fullscreen

Related posts