Roll forming machine 100 x 890 mm | SPA, PAC series 滚压成型机100 x 890毫米| SPA、PAC系列
Description
描述
The purpose of the profiling machine SPM 30/80-LM-QA45 / QA60 is to produce double standing seam profiles 25 from blanks, cut lengths or directly from the coil. In addition to the profile shaping unit of the basic SPM machine, the exit area of the SPM 30/80-LM-QA45 variant is equipped with a cross-cut system that may be swivelled by 45° (or 60° ) and an electronic length measuring device with a millimetre scale.
的仿形机SPM 30 / 80-lm-qa45 / qa60是从毛坯生产双站在煤层剖面的目的25、切割长度或直接从线圈。除了轮廓整形单元基本SPM机，SPM的30 / 80-lm-qa45变出口地区设有交叉切割系统可旋转45°（或60°）和电子长度的毫米级的测量装置。
The profiling unit (tie-bars) with 7 shaping levels are supplied on a torsion-proof steel frame. The strip or sheet material is guided by lateral infeed guides on ball-bearings on the fixed as well as the adjustable side. These are adjustable to set the outer edges of the profile. The profile rollers are made of high quality special steel and surface treated. This special treatment provides the rollers with a high level of corrosion and wear protection. The bearings of the upper profile rollers are have resilient mounts to allow them to adapt to the material thickness. This ensures that impression-free and low-wear production of the panels. The profiling machine can be moved on 4 castors. Two of the castors are equipped with brakes to stop the machine from moving unintentionally. The machine can also be moved by a crane using the eye-bolts that are supplied as well. This ensures a wide range of applications for the machine during operations and on the construction site.
在一个扭力钢框架上，提供了7个成形水平的分析单元（拉杆）。带材或片材横向进给导轨引导对固定球轴承以及可调侧。这些可调设置的轮廓的外边缘。型材辊采用优质钢材表面处理。这种特殊的处理提供了一个高水平的腐蚀和磨损保护辊。上轮廓辊的轴承具有弹性支座，以使其能够适应材料的厚度。这确保了无磨损和低磨损的面板生产。仿形机可以4个脚轮移动。两脚轮配有刹车停止机器运动无意。这台机器也可以由一个起重机使用的眼睛螺栓，以及提供。这确保了广泛的应用程序的机器在操作和施工现场。
Roll forming machine 100 x 890 mm | SPA, PAC series 滚压成型机100 x 890毫米| SPA、PAC系列
