Slitting machine max. 1 250 x 1.25 mm, 0.75 kW | MSS 1250 纵剪机最多1个250×1.25毫米，0.75千瓦| MSS 1250
Description
描述
Slitting and cross cutting unit for flexible, accurate and burr-free cutting of wide strip material with a max. width of 1,250mm and a thickness of up to 1.25 mm. The use of the Schlebach slitting unit provides a cost-effective storage method for strip material and a reduction of waste based on the optimized utilisation of wide strip material. In essence, the use of large coils reduces the material purchase costs. The optimised arrangement of the control elements combined with one of the two control options means that a single operator can control the machine.
分切和灵活的交叉单元，准确和毛刺与最大宽度1250mm，厚度可达1.25毫米宽的条状材料易切削。该schlebach纵剪机组的使用提供了一种性价比高的存储方法带材料和减少浪费的基础上优化利用宽条料。在本质上，大线圈的使用降低了材料采购成本。控制元件的优化配置，结合了其中的一个控制选项，即一个单一的操作员可以控制机器。
The slitting machine is equipped with a stainless steel infeed table, a fixed and an adjustable stop. The fixed and the adjustable stop of the side sheet guide are equipped with ball bearings for low edge-wear strip intake. The infeed width is continuously and precisely adjustable from a min. of 200mm to a max. of 1,250mm. The strip feeder is also equipped with specially coated low-wear feed rollers. The high precision blade shafts have a diameter of 100mm to accommodate up to 11 pairs of slitting blades (depending on material).
分切机配备了不锈钢进料台，固定和可调停止。固定和侧纸导轨的可调停止，配有低边带的球轴承的摄入量。进料宽度不断从最小200mm到最大1250mm精确可调。条带馈线还配有专门的涂层的低磨损饲料辊。高精度的刀轴直径100mm容纳11双分切刀片（根据材料）。
Slitting machine max. 1 250 x 1.25 mm, 0.75 kW | MSS 1250 纵剪机最多1个250×1.25毫米，0.75千瓦| MSS 1250
