Hydraulic punching press / automatic / sheet metal 0.5 – 0.8 mm | FSE 液压冲孔机/自动/金属片0.5 – 0.8毫米| FSE
Characteristics
特点
Drive type:
驱动型：
hydraulic
液压
Control:
控制：
automatic
自动
Product handled:
产品处理：
sheet metal
金属板材
Description
描述
The electro-hydraulic combination FSE is used for the cost effective manufacture of fixing, slide fixing and suspension clips from strip material. Residual material, when cut to the required width, allows complete utilisation of material remnants. The desired adherence is selected via the switchboard. Only one punch can be set to operate at any one time.
电液组合FSE用于低成本制造的固定、滑动固定悬吊夹从条料。剩余的材料，当切割到所需的宽度，可以完全利用的材料残余。通过交换机选择所需的坚持。只有一拳可以在任何一个时间操作。
The metal strip is fed forward until it triggers a non-contact proximity switch to activate the operation. The repetition rate depends on the length of the attachment. The operator is responsible to achieve the best performance.
金属带材被馈送到它触发一个非接触的接近开关来激活操作。重复率取决于附件的长度。该运营商负责实现最佳性能。
An item counter may be set to a desired number of pieces. When the required quantity is reached, the FSE is turned off automatically.
一个项目计数器可以设置为所需数量的件。至需要量时，FSE自动关闭。
The maximum sheet metal thickness is:
最大片厚：
Non-ferrous metals up to 0.8mm
有色金属达0.8mm
Sheet steel up to 0.7mm
钢板达0.7mm
Stainless steel up to 0.5mm
不锈钢可达0.5mm
Hydraulic punching press / automatic / sheet metal 0.5 – 0.8 mm | FSE 液压冲孔机/自动/金属片0.5 – 0.8毫米| FSE
