Electric bending machine / profile / manual 50 mm | Biegeboy 电动弯管机/资料/手动50毫米| biegeboy
Characteristics
特点
Operation:
运行：
electric
电
Product handled:
产品处理：
profile
简介
Operational mode:
运行方式：
manual
手册
Description
描述
The bending machine Biegeboy is suitable for convex bending of profiled shapes at 90° edging for the roofing and cladding of dormers, domed surfaces and barrel-vaulted roofs. Lengths of edged metal are stretched in the vicinity of the folded up edge by a special roller system. Longer lengths are formed on site. They are fixed to the substructure at one point. The Biegeboy is then placed on them and led along the edge fold.
折弯机biegeboy适用于凸型形状的弯曲在90°镶边的屋面和幕墙的天窗，圆顶表面和桶拱形屋顶。在附近的一个特殊的辊系统的边折叠的边的金属的长度被拉伸。较长的长度上形成的网站。它们被固定在一个点上的子结构。然后放在他们的biegeboy和带折边。
The material is stretched by the pressure rollers so that it conforms to the substructure. The pressure has to be adjusted to suit the radii and the grade or thickness of the material. If you need short profiled shapes the Biegeboy has to be mounted on a stand and operation can be at the workshop. The machine is used for bending on edged shapes with a turn-up height of 50mm and a minimum radius of 300mm. The smallest radii are produced in multiple operations.
该材料被压辊拉伸，使其符合下部结构。压力必须调整，以适应半径和材料的等级或厚度。如果你需要短型形状的biegeboy已被安装上的立场和操作可以在车间。本机用于弯曲的边缘形状与出现高度为50mm，最小半径为300mm。在多个操作中产生的最小半径。
Electric bending machine / profile / manual 50 mm | Biegeboy 电动弯管机/资料/手动50毫米| biegeboy
