美国 Highland Technology
T130单通道皮秒EOM驱动器
- 三个范围内的可编程延迟和脉冲宽度
- 可编程幅度从 -0.5 伏到 -7 伏到 50Ω 负载
- 上升时间/下降时间 100 皮秒，典型值 (10 – 90%)
- 内置宽度发生器，可调范围为 250 皮秒至 300 纳秒，FWHM
- 内置偏置电源，可调±6V
- +24V DC 供电
- 通过 USB、RS-232 或板载微调器进行控制
- 内置自检 (BIST)
- 带有表面安装法兰的紧凑型挤压外壳
- 应用包括：
- 驱动 50Ω 电光相位和幅度调制器
- 在泵浦光纤系统中驱动 50Ω 直接调制种子激光器
- 射频应用：快速脉冲调制、相移、谐波生成
- 时域器件表征和建模
- 半导体测试
- 系统电缆/正时装饰
| FUNCTION | Externally-triggered single-channel pulse generator and EOM driver |
| TRIGGER | Rising-edge trigger, 50Ω input impedance, DC coupled Threshold: +0.5 volts Max safe input: -0.6 volts to +6 volts |
| PROPAGATION DELAY | Range 1: 8ns nominal insertion delay Range 2: 20ns nominal insertion delay Range 3: 70ns nominal insertion delay |
| RF OUTPUT | User adjustable -0.5 volts to -7 volts peak into 50Ω loads; AC-coupled |
| PULSE RATE | Min pulse rate is 0 Hz Range 1: max 50MHz depending on delay/width settings Range 2: max 25MHz depending on delay/width settings Range 3: max 5MHz depending on delay/width settings |
| RISE/FALL TIMES | 100ps, typ measured at 10/90% |
| PROGRAMMABLE TIMINGS | Range 1 : delay 0 to 5ns width 250ps to 5ns d+w < 5ns Range 2 : delay 0 to 50ns width 500ps to 50ns d+w < 50ns Range 3 : delay 0 to 300ns width 1ns to 300ns d+w < 300ns Ranges are selectable by front-panel DIP switch or remotely |
| JITTER | Range 1: < 3ps RMS typ. Range 2: < 10ps RMS Range 3: < 50ps RMS |
| BIAS SUPPLY | Internal / External DC bias tee injection at RF OUT Internal BIAS supply adjustable ± 6 volts, 100 mA max BIAS connector serves as Hi-Z voltage monitor when set to INT mode |
| CONTROL | Trimpots, RS-232, and USB |
| OPERATING TEMPERATURE | 0 to 50°C, non-condensing |
| STORAGE TEMPERATURE | -20 to 80°C |
| POWER | +24 volts at 250mA, max J24 universal wall-plug power supply furnished |
| COMMUNICATION | USB, RS-232 |
| CONNECTORS | TRIG RF OUT RF MON BIAS OUT SMA jacks Standard B receptacle for USB control, 2.5mm phono jack for RS-232 |
| LED INDICATORS | Green POWER Blue TRIGGER Orange COMM Red ERROR |
| PACKAGING | 4.84″ (L) x 4.06″ (W) x 1.20″ (H) extruded aluminum enclosure |
| CONFORMANCE | OEM product has no UL/FCC/CE compliance requirements Designed to meet UL/FCC/CE requirements |
