Our Plasma Cleaners require a vacuum pump with a minimum pump speed of 1.4 m3/hr (0.83 ft3/min) and an ultimate total pressure of 200 mTorr (0.27 mbar) or less
Rotary vane pumps with hydrocarbon pump oil (included with pump)
Suitable for pumping nonreactive or inert gases (e.g. Air, N2 or Ar)
These pumps are not intended for pumping oxygen; see our Oxygen Service Pumps
For corrosive or reactive gases, consult with us directly
PDC-VP (115V); PDC-VP-2 (230V)
Premium Quality Model (higher reliability)
Pumping Speed (50/60 Hz): 3.2/3.6 m3/hr
Ultimate Total Pressure (gas ballast closed): 1.5 mTorr
Ultimate Total Pressure (gas ballast open): 23 mTorr
Motor Power (50/60 Hz): 250/300 W
Weight: 34 lbs
Size: 9" H x 15" W x 5" D
Integrated inlet check valve
Pump inlet: includes hose, hose clamps, and hose adaptor to connect plasma cleaner to pump inlet
Pump outlet: includes oil mist filter to filter oil vapor from pump exhaust
PDC-VP-OIL (1 quart)
Replacement oil for Premium Quality Vacuum Pumps PDC-VP, PDC-VP-2
PDC-VPE (115V); PDC-VPE-2 (230V)
Basic Model (lower cost)
Pumping Speed (50/60 Hz): 5.1 m3/hr
Ultimate Total Pressure (gas ballast closed): 7.5 mTorr
Ultimate Total Pressure (gas ballast open): 150 mTorr
Motor Power (50/60 Hz): 373 W
Weight: 27 lbs
Size: 9.75" H x 14" W x 5.5" D
Pump inlet: includes check valve, hose, hose clamps, and hose adaptor to connect plasma cleaner to pump inlet
Pump outlet: includes oil mist filter to filter oil vapor from pump exhaust
PDC-VPE-OIL (1 quart)
Replacement oil for Basic Vacuum Pumps PDC-VPE, PDC-VPE-2