Right-angle gear reducer / for counter-rotating twin-screw extruder PGG series 反向旋转的双螺杆挤出机PGG系列直角齿轮减速器/
Characteristics
特点
Shaft orientation:
轴方向：
right-angle
直角
Product applications:
产品应用：
for counter-rotating twin-screw extruder
反向旋转的双螺杆挤出机
Torque:
转矩：
Min.: 4000 Nm (2950.25 ft.lb)
分钟：4000 nm（2950.25 ft.lb）
Max.: 65000 Nm (47941.54 ft.lb)
最大：65000 nm（47941.54 ft.lb）
Rotational speed:
转速：
Min.: 20 rpm (125.66 rad.min-1)
分钟：20转（125.66拉德·min-1）
Max.: 50 rpm (314.16 rad.min-1)
最大：50转（314.16拉德·min-1）
Power:
权力：
Min.: 50 kW (67.05 hp)
50千瓦（67.05马力）
Max.: 280 kW (375.49 hp)
最大：280千瓦（375.49马力）
Description
描述
The PGG series is manufactured by Eisenbeiss, and is a 4-shaft distribution system that has meshing output shafts. The unit has an energy efficient and compact layout, and it has minimal operating costs. The model has a rated motor output that ranges from 50 kW up to 280 kW. Its rated output torque ranges from 4,000 rpm up to 65,000 Nm per shaft, and the output shaft has an operating speed that ranges from 20 rpm up to 50 rpm. The gear ratio of the module ranges from 35:1 up to 100:1.
PGG系列是由Eisenbeiss，是4-shaft分配系统具有啮合输出轴。该装置具有高效紧凑的布局，具有最小的运行成本。该模型具有额定电机输出范围从50千瓦至280千瓦。其额定输出扭矩范围从4000转高达65000纳米每轴，和输出轴有一个工作的速度，范围从20转高达50转。模块的范围从1到100:1的齿轮比。
The PGG series utilizes the merged immersion and forced-feed lubrication as its standard lubrication system. There is an option to install a lubricant cooling system. It has the capacity to bear a screw back pressure lesser than or equal to 500 bar of a steady load.
PGG系列采用合并的浸泡和强制润滑为标准的润滑系统。有一种选择安装润滑剂冷却系统。它有能力承受一个螺丝背面的压力小于或等于500巴的一个稳定的负载。
Right-angle gear reducer / for counter-rotating twin-screw extruder PGG series 反向旋转的双螺杆挤出机PGG系列直角齿轮减速器/