Flame Treatment Unit / pillar GAS FLAMING C 火焰处理单元/支柱气体燃烧
Characteristics
特点
Type:
类型：
pillar
支柱
Description
描述
To print on certain surfaces (in particular, plastics such as polypropylene, polyethylene and poly-acetate) may be necessary to subject the pieces, before (pre-treatment) or after printing (post-treatment), to a flaming process. This operation promotes the adhesion of the ink and its polymerization because it eliminates the superficial greasy substances and creates a temporary modification of the material surface, increasing its surface tension.
在某些表面上印刷（特别是聚丙烯，聚乙烯和聚乙酸乙烯酯）可能是必要的主题的作品，前（前处理）或印刷后（后处理），到一个燃烧的过程。此操作可促进油墨的附着力和聚合，因为它消除了表面的油腻物质，并创建一个临时修改的材料表面，增加其表面张力。
There are several types of flamers: column, for lines, flaming tape. It is possible to install burners for LPG gas of different sizes depending on the surface to be treated (60-100-130-150-200 mm); they are fitted with flame non-return valves and made according to the EC regulations in force.
有几种类型的产品：柱，线条，火红的磁带。它可以安装于待处理表面大小不同的液化气燃烧器（60-100-130-150-200毫米）；他们都装有火焰止回阀，根据欧盟法规生效了。
The automatic control device allows to set the ignition of the flame, the detection of its presence, the gas solenoid valve.
自动控制装置可以设置火焰的点火，其存在的检测，气体电磁阀。
GAS FLAMING C
气体燃烧
It is a column flamer, convenient because adjustable in height and therefore adaptable to all working conditions. With a pneumatic mode of operation, it can be connected to any pad printing machine produced by Comec Italia. The flame can start either by pedal or through consent of the machine to which it is connected. It is available in the model with 1 or 2 burners.
这是一列喷火器，方便，可调高度，因此适用于所有的工作条件。一个气动操作方式，它可以连接到任何的移印机的意大利科业产生。火焰可以通过踏板或通过它连接的机器的许可来启动。它可在模型中有1个或2个燃烧器。
Flame Treatment Unit / pillar GAS FLAMING C 火焰处理单元/支柱气体燃烧
