Flame Treatment Unit / belt conveyor GAS FLAMING N 火焰处理装置/输送带输送气体
Characteristics
特点
Type:
类型：
belt conveyor
皮带输送机
Description
描述
To print on certain surfaces (in particular, plastics such as polypropylene, polyethylene and poly-acetate) may be necessary to subject the pieces, before (pre-treatment) or after printing (post-treatment), to a flaming process. This operation promotes the adhesion of the ink and its polymerization because it eliminates the superficial greasy substances and creates a temporary modification of the material surface, increasing its surface tension.
在某些表面上印刷（特别是聚丙烯，聚乙烯和聚乙酸乙烯酯）可能是必要的主题的作品，前（前处理）或印刷后（后处理），到一个燃烧的过程。此操作可促进油墨的附着力和聚合，因为它消除了表面的油腻物质，并创建一个临时修改的材料表面，增加其表面张力。
There are several types of flamers: column, for lines, flaming belt. It is possible to install burners for LPG gas of different sizes depending on the surface to be treated (60-100-130-150-200 mm); they are fitted with flame non-return valves and made according to the EC regulations in force.
有几种类型的产品：柱、线、燃烧带。它可以安装于待处理表面大小不同的液化气燃烧器（60-100-130-150-200毫米）；他们都装有火焰止回阀，根据欧盟法规生效了。
The automatic control device allows to set the ignition of the flame, the detection of its presence, the gas solenoid valve.
自动控制装置可以设置火焰的点火，其存在的检测，气体电磁阀。
GAS FLAMING N
气体燃烧
It is a flaming belt. The belt with the pieces flows through a frame on which are mounted the burners. A photocell detects the passage of the workpiece and activates the flame. The keyboard command allows you to adjust the speed of the belt. The belt is provided with gear motor.
这是一个燃烧的皮带。带件的皮带通过一个框架，在该框架上安装燃烧器。光电检测工件的通道和激活的火焰。键盘命令允许您调整带的速度。带上齿轮马达。
Flame Treatment Unit / belt conveyor GAS FLAMING N 火焰处理装置/输送带输送气体
