EZ-Tilt 5000-015-VIB

的EZ倾斜- 5000先的可编程双/单的线性模拟/数字出倾斜模块大约是一个先的CMOS微处理器定制的状态之上。 2“× 2”组电板提供了两个并模拟的倾斜宽制和RS – 232倾信息。 模块是完全为NULL和增益温度偿。 系统包括全系列的每一倾斜和两个件可值检测器每个一个线性校正。 模块使用任何任SX的- 003D空SX的- 003D空- L或SX的- C29的单倾传感器两个传感器组合提供了一种经济可的倾斜传感上级并发出的线性功应用决方案分率复性和对称性。 坚固的全封施工和MIL格的温度围内使些传感器常的精度为众多的OEM军事医学光学汽测仪对动化机器人技术和施工度测的应用场合。 在EZ -倾斜- 5000包括两个完全可编程的值检测线允用户置俯仰和横滚水平敏感报。 创新的四个固定丝孔简单体积小便于安。 系统可方便地提供了两个不同的倾斜传感器。 种罕的允用户决特殊应用求时一倾斜围另一方则的分率。 传感器可程校准以不同的位置和围有。 模拟和PWM出为完全件可编程并更新每个启用每个周期。 模拟出围是最的4Vdc并筹建全套度围1Vdc有底有。

EZ-TILT-5000, advanced programmable dual/single axis LINEAR Analog/Digital output tilt module, is built around a customized state of the art CMOS Microprocessor. A 2″x 2″ assembled PCB provides concurrent Analog, PWM and RS-232 inclination information in two axis of tilt. The module is fully temperature compensated for NULL and GAIN. The system includes full range linearity correction for each axis of tilt and two software adjustable threshold detectors, one for each axis. The module uses any two sensor combination of either SX-003D-NULL, SX-003D-NULL-L or SX-C29 single axis inclination sensors and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent LINEARITY, resolution, repeatability and symmetry. Rugged hermetic construction and MIL-SPEC temperature range make these sensors perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications. The EZ-TILT-5000 also includes two fully programmable level threshold detector lines that allow the user to set level sensitive alarms for pitch and roll. Innovative design, four set screw holes and small size facilitate uncomplicated mounting. The system can be easily supplied with two different tilt sensors. This rare option lets users solve special applications when one axis requires high tilt range while the other one requires high resolution. Sensors could be remotely located and calibrated to different ranges if so required. Both Analog and PWM outputs are fully software programmable and are updated each read cycle for each enabled axis. The analog output range is top limited by 4Vdc and bottom limited by 1Vdc for the full set angular range.