EZ-TILT-3000-045

标准两个由度模拟模块倾斜程度是建立在一个先的CMOS定制的SMT元件状态和。 2“× 2”印刷电板组有一个总度17毫米包括最大的传感元件。 模拟比例对倾斜的直流电压出为续两的倾斜倾向的信息。 样低的成本模块是完全为众多的OEM广倾​​的应用场合。 模块包括两个独立的纵横向NULL和增益整。 温度值作为一个单独的求外参出。 模块与任何单或双倾传感器电型操作力。 位于传感器可程如有。 模块可提供3.5与“以ASCII格式存储在磁盘上的原始数据校准。电液可修改以滤掉冲击和振动引的差。

The standard two degree of freedom ANALOG tilt module is built around a customized state of the art CMOS SMT and Feed Through components. A 2″ x 2″ assembled PCB has a total height including the sensing element of 17mm max. Analog proportional-to-tilt DC voltage output provides continuous inclination information for both axis of tilt. This LOW cost module is perfectly suitable for numerous OEM wide angle inclination applications. The module includes independent NULL and GAIN adjustments for both Pitch and Roll. Temperature value is available as a separate output for external reference upon request. Module is capable of operating with any type of Single or Dual axis Electrolytic tilt sensor. Sensor could be remotely located if so required. Module could be supplied calibrated with raw data stored on a 3.5″ disk in ASCII format. Electrolyte may be modified to filter out errors induced by shock & vibration.