EZ-TILT-1000

标准两个由度的单片模块的倾斜程度是建立在一个先的CMOS单片机定制的状态。 种微小的SO18 -片或DIP – 18定制的成电是提供信息的双倾倾斜续在一个标准的RS – 232与8位分率格式传感器的力。 一个加的模拟入17是可的温度或任何其他环境监测或入出校正利用现有。 单位信“终端”在Windows模式或利用定义件的DX – 232 – A是每个单NO的用。 单片换模块是完全为大型OEM如拟实境玩具汽算机和消电子市场使用。 IC或价模块可以与任何操作双电倾斜传感器。 它可与由组和演示件或级终端模式下。 是完全对示的粘度的影响和/或模块的响应的倾斜平均合。 特殊的测实如果倾斜传感器包括一个我测以确在​​上电或复位传感器的存在。 价单位是在1.5 × 1.5寸的PCB bult从标准9Vdc细作。

The standard two degree of freedom single IC tilt module is built around a customized state of the art CMOS Microcontroller. The tiny SO18-SMD or DIP-18 customized IC is capable of providing continuous inclination information for dual axis tilt sensors in a standard RS-232 format with 8 bit resolution. An additional analog input on pin #17 is available for optional temperature or any other environmental input used for monitoring or correction of the output. Unit communicates through “TERMINAL ” mode in Windows, or by utilizing custom software DX-232-A, which is provided at NO cost with each order. Single IC conversion module is perfectly suitable for large OEM markets such as VIRTUAL REALITY, TOYS, AUTOMOTIVE, COMPUTER, and CONSUMER ELECTRONICS. The IC or the EVALUATION module is able to operate with any Dual axis Electrolytic tilt sensor. It is available assembles and operates with the free demo software or via the hyper terminal mode. It is perfectly suitable for visual demonstration of the influence of viscosity and/or averaging on the response of the tilt module. Special test confirms if a tilt sensor includes self test to confirm sensors presence on POWER UP or RESET. The evaluation units is bult on 1.5 x 1.5 inch PCB, and operates from a standard 9Vdc cell.