Battery impedance tester 19.999 mΩ | BIM 蓄电池阻抗测试仪19.999米Ω| BIM
Characteristics
特点
Test type:
试验类型：
battery impedance
电池阻抗
Description
描述
Operation is fast and simple. Just press the spring-loaded probes onto the two poles of the battery. After 1.5 seconds, the unit beeps (indicating good contact) and displays the battery voltage and either the number of siemens or milliohms, depending on the knob setting. The display continues to show these numbers after the probes are removed; it resets only when the probes are pressed onto the next battery. The impedance and voltage of any battery between 1.2 and 60 volts can be read. Because of the wide range of voltages, even single low-voltage cells, such as NiMH, can be measured. The manufacturers of some batteries specify impedance in milliohms while other specify in siemens (one divided by the resistance in ohms). This meter will display both types of impedance for any given battery. Accuracy is /- 2 of the value.
操作快捷简单。只需按下弹簧探针到电池的两极。1.5秒后，单位的哔哔声（表示接触良好）和显示电池电压和数西门子或毫欧，根据旋钮设定。显示继续在探头删除显示这些编号；将只有当探针压到下一个电池。在1.2和60伏之间的任何电池的阻抗和电压可以读取。由于广泛的电压，即使单个低压细胞，如镍氢电池，可以测量。一些电池厂家指定阻抗毫而其他指定西门子（一个除以电阻欧姆）。该仪表将显示这两种类型的阻抗为任何给定的电池。准确度/ – 2的值。
Battery impedance tester 19.999 mΩ | BIM 蓄电池阻抗测试仪19.999米Ω| BIM
