Thermionics Hanks HM2 Hydra, Dynamic Source e-Gun™ Evaporation Source Hanks 系列蒸发源电子枪

Our High-Efficiency Hanks HM² e-Guns™ provide patented and award winning modular magnet beam focusing system with enhanced beam collimation, eliminating beam curl.

HM² e-Guns™ are also 2/3 the size of standard e-Guns and 350% more efficient magnetically.

我们的高效Hanks HM²e-Guns™提供获得专利和屡获殊荣的模块化磁束聚焦系统,具有增强的光束准直性,消除了光束卷曲。
HM²e-Guns™的尺寸也是标准e-Guns的2/3,磁性效率提高了350%。

Our High-Efficiency Hanks HM² e-Guns™ provide patented and award winning modular magnet beam focusing system with enhanced beam collimation, eliminating beam curl. Our innovative Hanks HM² Hydra design consists of one (1) or two (2) compact array(s) of crucibles and emitters which translate linearly with respect to each other to provide for the co-deposition of up-to six different materials simultaneously.

HM² e-Guns™ are also 2/3 the size of standard e-Guns and 350% more efficient magnetically.

我们的高效Hanks HM²e-Guns™提供获得专利和屡获殊荣的模块化磁束聚焦系统,具有增强的光束准直性,消除了光束卷曲。我们创新的Hanks HM²Hydra设计由一(1)或两(2)个紧凑的坩埚和发射器阵列组成,它们彼此线性平移,可同时提供多达六种不同材料的共沉积。
HM²e-Guns™的尺寸也是标准e-Guns的2/3,磁性效率提高了350%。

Features:

  • Optimized emitter and sweep coil assemblies
  • Eliminations of pole pieces – vertically mounted magnets results in less magnetic flux
  • 0-200 Hz sweep, repeatable, uniform evaporation, no “tunneling” and source material eruptions
  • Precise and stable evaporation rates as low as 1-2 A/sec
  • 35% smaller than traditional evaporation sources with equivalent volume, evaporation rate and power capacity
  •  Available in HV [2×10-9 Torr] and UHV [2×10-11 Torr]
  • Ideal for sequential or co-evaporation
  • Power Supplies, Crucible Liners and other Accessories available

特征:
优化的发射器和扫描线圈组件
消除磁极片——垂直安装的磁铁导致磁通量减少
0-200Hz扫频,可重复,均匀蒸发,无“隧道效应”和源物质喷发
精确稳定的蒸发速率低至1-2A/sec
比传统蒸发源小35%,具有同等体积、蒸发率和功率容量
有高压[2×10-9Torr]和特高压[2 x 10-11Torr]两种
非常适合顺序蒸发或共蒸发
提供电源、坩埚衬里和其他配件

 

Models:

  • Single— 7 cc to 156 cc single crucible / 1 emitter – 6-20 kW
  • Single Rotary— 7 cc to 25 cc – 4 crucible / 1 emitter – 6 & 10 kW
  • Twin™— 10 cc, 15 cc, 40 cc – 2 crucible / 2 emitter – 10 & 15 kW
  • Triad™ — 10 cc, 15 cc, 40 cc – 3 crucible / 3 emitter – 6 & 10 kW
  • Quadra— 10 cc, 15 cc, 40 cc – 4 crucible / 4 emitter – 6 & 10 kW
  • Hydra-1™— Single array of 5 crucibles / 1-3 emitters (see Hydra description below for more details)
  • Hydra-2™— Dual array of 5 crucibles / 1-3 emitters, totaling 10 crucibles / 2-6 emitters (see Hydra description below for more details)

Hanks HM² e-Guns are manufactured and protected under one or more of the following patents: 4,835,789; 4,891,821; 4,947,404

 

Hanks HM² Hydra e-Gun™

Our innovative Hanks HM² Hydra design consists of one (1) or two (2) compact array(s) of crucibles and emitters which translate linearly with respect to each other to provide for the co-deposition of up-to six different materials simultaneously.

The Hydra configuration’s efficient utilization of space allows for four (4) different combinations of six crucibles and up to forty-two permutations of two-metal combinations, are available for co-deposition in a single vacuum pumpdown.

The Hydra eliminates adjacent source interactions without complex beam directions and bulky field shunting components. Thus, the co-evaporation design allows close source proximity for uniform coating and material interaction. Additionally, individual water cooling for each source prevents steam build-up and the inclusion of separate sweep coils for each source and promotes the total independence of the operation parameters of each source from the adjacent source.

Hanks HM²Hydra电子枪
我们创新的Hanks HM²Hydra设计由一(1)或两(2)个紧凑的坩埚和发射器阵列组成,它们彼此线性平移,可同时提供多达六种不同材料的共沉积。
Hydra配置对空间的有效利用允许六个坩埚的四(4)种不同组合和两种金属组合的多达四十二种排列,可在单个真空泵中进行共沉积。
Hydra消除了相邻源的相互作用,而无需复杂的波束方向和笨重的场分流组件。因此,共蒸发设计允许接近源,以实现均匀的涂层和材料相互作用。此外,每个水源的单独水冷可以防止蒸汽积聚,并为每个水源配备单独的扫掠线圈,从而促进每个水源的运行参数与相邻水源的完全独立。

Hydra-1 & 2 Specifications

Feature 10 kW Model 15 kW Model
Maximum Power 10 kW 15 kW
Crucible volume 10/15 cc 40 cc
Emission voltage 10 kV 10 kV
Emission current 0 to 1.0 A 0 to 1.5 A
Filament 700 W 700 W
E-beam deflection 220° 220°
Beam spot size .25″ diameter .25″ diameter
Evaporation rate (for aluminum) 1 gm/min at 10 kW 3.6 microns at 25 cm 1.5 gm/min at 15 kW 50,000 Å min
X and Y sweep Hyper-Unimelt Sweep (0-200 Hz) Hyper-Unimelt sweep (0-200 Hz)
Water 3.0 gpm/crucible, common return (up to 30 gpm) 3.0 gpm/crucible, common return (up to 30 gpm)
Crucible material OFE copper OFE copper
Bakeout temp 230°C (446°F) 230°C (446°F)
e-Gun size–single array 6.25″ x 5.5″ x 15″ 6.25″ x 5.75″ x 15″
e-Gun size–double array 6.25″ x 11″ x 15″ 6.25″ x 11.5″ x 15″

Related posts