产品介绍:
PP板是由PP共聚体混合而成,具有一个重大缺点,表面能非常低,导致粘合性非常低。电晕处理系统能显著提高表面能,提高附着力。
木板和泡沫的电晕处理,能够优化处理过程以及减少浪费,这对整个表面处理过程中是非常重要的。为了得到良好的结果,有必要在板的边缘进行电晕放电。通过增加层的厚度,滚筒的寿命,以及边缘放电,厚度可达50mm,电极可调节。
数字输出形式可对电极高度进行调整,在处理瓦楞纸板时,重要的是腔体内部的限制,为了避免能量损失以及臭氧产生,内部腔体处理时,反电极的绝缘层限制了他们的处理能力。
FEATURES: | |
Easy to install and use | The system requires compressed air and the electrical connection. |
Single or dual sided | Both single and dual sided treatment systems available. |
Easy adjustment of treatment width | The stainless steel wire electrodes are easily adjusted in treatment width. This requires no change to the electrical power system. |
Watt density control | In combination with the HV-X series power generator, the system will adjust the generator output power according to the line speed. |
Parallel opening | A parallel sliding device with pneumatic cylinders enables easy access to the treating area for cleaning and maintenance. |
Process control | In combination with the HV-X series power generator and PLC units the system can be monitored and adjusted very easily. |
Cost efficient treatment process | Only electrical power is needed to achieve the effective treatment of foam and board, typically systems run from 1-4 kW depending on width and speed. |
Safe and clean | The system is equipped with safety switches and interlocks to ensure safe use. The ozone filter system eliminates the ozone generated during the process. |
Technical Specifications | FoamTEC Plasma Treater |
Mains power | 3 Ph. 400 VAC or 230 VAC (others on request) |
Treatment power | 200-4000 Watts |
Compressed air | 5-6 bar dry & clean |
Treatment area | Single or dual sided treatment. Max. 50 mm thick |
Treatment width | 10-3000 mm |
Line speed | 1-30 m/min (others on request) |
Treatable materials | PP, PE, PVC, nylon, PC, PVR and others (non-conductive only) |
Optional | Driven rollers for part movement |
Control and connectivity | Complete with touch panel. (Standard – Proface) |
Regulation compliance | CE – RoHs – WEEE |