Using a special 4-pole contact probe the MR-1 is Surface resistance meters used for the determination of a sufficient electromagnetic compatibility of metal-coated plastic cases. The MR-1 is small, easy to handle and is powered by a battery or an accumulator.
使用一种特殊的四极接触探头,MR-1是用于确定金属涂层塑料外壳的足够电磁兼容性的表面电阻计。MR-1体积小,易于操作,由电池或蓄电池供电.
Resistance measurement | |
Range | 10 mΩ – 1000 Ω, decadic |
Resolution | 10 µΩ |
Range automatic | switchable |
Measuring error | ± 0.2% of reading ± 2 digit |
Measuring current | max. 100 mA |
Range selection | automatically or by using the keypad |
Range display | 3 ½ digits |
Measuring speed | approx. 900 ms (without automatic) |
Coat thickness measurement | |
Measurement scale | 0.01 µm – 100 µm * |
Measuring error | ± 0.5% of reading max. |
Result display | 2..3 digits (depends on actual value) |
Error indication | before EVERY measurement |
Current error | Display: ‚Current‘ |
Sense error | Display: ‚Sense‘ |
Range overrun | Display: ‚Range‘ |
Parameter setup | by using keypad |
Interface | RS-232C (Transmit measured values only!) Baudrate fixed to 2400 Baud |
Dimensions | 50 x 80 x 35 mm (WxHxD) |
Power supply | 9V internal battery or line voltage adapter |
Weight | approx. 600 g |