简介：
高级静态和动态摩擦系统RR/FT符合全部国际测试标准，先进的计算机控制，精确测量静态和动态摩擦。操作简单，所有的参数和测试结果显示在易读的液晶屏幕上；内置结果打印机给出测试结果和数据统计通过负载单元精确的测量样品表面的摩擦系数，采用图解法显示动态摩擦系数，其自动校准的程序确保摩擦的准确性。操作简单，参数及结果均可在LCD显示器上显示。RS232输出端口， Windows软件程序，结果可用表格及图解两种方式输出。温度控制，压板最高温度可达120℃，最低温度达0℃的冷却器。通过使用计算机反馈循环程序来测量样品表面的静、动态摩擦系数。
仪器特点：
1.测量：静态摩擦、动态摩擦、剥离测试
2.负载单元：标准1000g，也可提供更大的负载单元
3.滑板200g(63.5*63.5)符合国际标准
4.测试速度：最高1800mm/分钟
5.测试距离：通过微处理器控制，最大350mm/min
6.可根据需要定制加热台和冷却台
7.工作台温度：每次测试都记录并打印
8.带有Windows软件，RS232输出端口
9.剥离测试：180°测试附件，可选择其它附件
标准配置：
* 高级专业的微处理器控制
* 0-150 °C数字温度测量、控制和显示
* 高达1800mm/minute的不同速率
* 1kg装载单元（可提供更大的）
* 180°针对压力敏感材料的附加装置
* 满足客户具体需要，符合ASTM和ISO 测试标准
* 符合所有的国际测试标准
* 图表统计分析
* 每次测试时记录和打印外围床温度
* 校正工具箱
* 液晶显示
* 操作简单的触摸键盘
* 模式选择
* 内置结果打印机
* 带有特殊数据转换的RS232输出
* 软件
仪器技术参数：
| 负载单元额定值 | 1kg |
| 全量程非线性偏转 | 0.011% |
| 全量程偏转滞后 | 0.032% |
| 重量 | 30kg |
| 尺寸 | 78*48*750px |
| 电源 | 220-240 volts 1ph 50Hz |
Product Description
The Static & Dynamic Friction (or Slip & Friction) Tester has been designed to determine the friction characteristics of materials. Primarily by pulling one surface over another. It is ideally suited where the production of a product relies on Film, Foil, Paper or Board sliding over machinery or another material for packaging purposes.
The advanced dedicated microprocessor control removes operator variability from the test procedure by controlling dwell time, sled movement etc, thereby giving high accuracy of results for both static and dynamic friction.
Designed in accordance with ASTM D1894 And ISO 8295 International test standards, This apparatus can be used with all types of flexible packaging, foils, paper, board, rubber, linoleum, textiles and leather. 180o peel or adhesion tests can also be performed, other attachments to any International test standard are available on request.
The on board microprocessor records the normal force required to produce the sliding motion using a very accurate load cell. The results are shown graphically on the PC so that both the static and sliding friction can be observed throughout the test. These results can be printed out via the on board mini printer or downloaded to the computer for analysis in Microsoft Excel.
A built in calibration can be carried out at any time by using the calibration kit provided.
Standard features include
Advanced dedicated microprocessor control, Touch membrane keypad for ergonomically simple data entry, Easy to read liquid crystal display, Sequence logic menu auto prompt selection, Built-in test results printer, RS232 output with special data transfer lead and Windows data link PC software, Tabular and graphical statistical analysis, Data file capture, Digital temperature display and control, Auto prompts for test procedures, calibration and test results, Variable speed sled velocity up to 1800 mm/minute, 1 kg load cell, 180� peel attachments for pressure sensitive material, Sleds to ASTM and ISO test standards, Templates to any International test standard supplied to customer’s specific requirements, Calibration kit including cord, plug and 500 gram weight, Ambient bed temperature recorded and printed for each individual test, Fully traceable certificate of calibration, Product user manual, CE mark of conformity.
Optional accessories available
Heated bed option, Freezer bed option, Larger load cells, Sleds to customers requirements.
Test Description
Determines the coefficient of starting and sliding friction of plastic film and other materials when sliding over itself or other substances at specified test conditions.
Part Numbers
RR/FT
Complies with Standard(s)
ISO 8295, BS 2782: Part 8: Method 824A, ASTM D1894