The SCL stack actuators include a full-bridge strain sensor for closed-loop control and strain monitoring. The stack actuator is ceramic encapsulated for humidity protection and epoxy coated to insulate the high-voltage wiring and provide mechanical protection. The SCL actuators are ideally matched to the PiezoDrive PDu150CL driver that can be pre-calibrated to an actuator when ordered together. Applications include: Nanopositioning, Microscopy, Precision Machining, Vibration Control, Hydraulic Pumps, Valves, and Optics.
采用紫外固化环氧涂层（改善机械和湿度保护）。
热塑性套管可选，提供额外的机械保护和绝缘电极
堆叠执行器不应暴露在明显的拉伸载荷，不均匀分布的负荷，离轴载荷，弯曲力矩或扭矩。
陶瓷球头可选，改善负荷分配，简化安装，并减少弯矩。
连接线：100mm AWG26 PTFE 绝缘线
电压范围：-30V 到150V
应用范围：纳米定位，显微镜，精密加工，振动控制，液压泵，阀门和光学
| Order Code |
Stroke 150V |
Stroke -30 to 150V |
Length | Cross Section |
Cap. +/-20% |
Mass | Blocking Force |
Stiffness | Res. Freq. |
|
| SCL050509 | 9.5 um | 12 um | 9 mm | 5×5 mm | 0.7 5uF | 2.0 g | 1000 N | 105 N/um | 140 kHz | |
| SCL050518 | 20 um | 26 um | 18* mm | 5×5 mm | 1.6 uF | 3.8 g | 1000 N | 50 N/um | 70 kHz | |
| SCL050536 | 41 um | 53 um | 36 mm | 5×5 mm | 3.5 uF | 7.4 g | 1000 N | 24 N/um | 34 kHz | |
| SCL070718 | 19 um | 24 um | 18* mm | 7×7 mm | 3.0 uF | 7.3 g | 1900 N | 100 N/um | 70 kHz | |
| SCL070736 | 38 um | 50 um | 36 mm | 7×7 mm | 6.0 uF | 14 g | 1900 | 50 N/um | 35 kHz |
