{"id":1510208,"date":"2014-10-14T17:09:53","date_gmt":"2014-10-14T09:09:53","guid":{"rendered":"https:\/\/www.bihec.com\/?p=1426"},"modified":"2019-03-05T15:48:52","modified_gmt":"2019-03-05T07:48:52","slug":"lt-industries-inc%e5%85%ac%e5%8f%b8-parafuel-nir-biodiesel-analyzer-2","status":"publish","type":"post","link":"https:\/\/www.bihec.com\/lt-industries\/lt-industries-inc%e5%85%ac%e5%8f%b8-parafuel-nir-biodiesel-analyzer-2\/","title":{"rendered":"ParaFuel™ NIR Biodiesel Analyzer"},"content":{"rendered":"

ParaFuel™ systems from LT Industries\u00a0are small, rugged analyzers designed for\u00a0use in biodiesel Plants & laboratories.\u00a0Whatever the analytical need \u2013 Finished\u00a0product qualification, In-Process readings,\u00a0or incoming product properties — the\u00a0ParaFuel™ system can do the job. You\u00a0can expect low cost, fast results, and low\u00a0operator training loads from every\u00a0ParaFuel™ system.<\/p>\n

ParaFuel\u2019s full networking capability allows\u00a0data to be accessed wherever needed. OpCon-II\u00a0user interface provides customized screens,\u00a0result reporting, and data-logging. LTBus\u00a0software allows the system to interface with plant\u00a0DCS, PLC, or other computer systems using\u00a0Modbus, 4-20 mA, and other protocols.<\/p>\n

Easy to use, easy to own
\nMake fussy sampling procedures a thing of the\u00a0past. Simply dip the probe into a sample and hit\u00a0\u201cEnter\u201d on the controlling computer. The\u00a0ParaFuel provides your analytical results in\u00a0seconds.<\/p>\n

Available Options:<\/p>\n

\u2022 On-Line Integration \u2013 With sampling points<\/p>\n

directly in the process get real time\u00a0automated results. Use them to control your\u00a0process to balance other inputs, insure\u00a0complete reactions, and increase yield of\u00a0ASTM approved product.<\/p>\n

Analyzer Specifications:<\/p>\n

The ParafuelTM analyzer equipped with a Multiplexer, fiber optic
\ncable, and probe was used to scan Biodiesel blends and B-100
\ndirectly off the process.
\nThe measurements shown are Glycerin (Mono-, Di-, Tri-, and Total)
\nand the ratio of Biodiesel\/Diesel
\nfrom 1 to 20%. Blended product
\nincluded Animal Fat, Chicken Fat,
\nVegetable Fat, and Used Recycled
\nGrease as FAME sources. This
\nextreme range of variables indicates
\nthe robustness of the technique.
\nThe measurements shown are only
\na sampling of what the ParaFuelTM
\ncan bring to your lab.<\/p>\n

Reliability: Designed for twenty-four hour operations without shut-down.
\nSpectral range: 1200 \u2013 2400 nm (other ranges available from 400 \u2013 2400 nm)
\nScanning speed: 5 scans per second
\nSpectral addition: Scans may be added under computer control
\nMeasurement modes: Reflectance, Transmittance, Transflectance
\nData interval: 1 nm (1200 points over the spectral range)
\nBandwidth: 10 nm
\nPhotometric range: 5 Absorbance Units
\nWavelength repeatability: 0.01 nm
\nStray light: 0.1% or better
\nLight geometry: Optimized for minimum specular reflectance and maximal S\/N
\nAuxiliary port: Computer controlled for alternative sampling
\nPossible signal output: Multiple 4-20 mA, multiple voltages, MODBUS, and more
\nPower: 120V, 3.5 Amp, 60Hz or 220V, 1.8 Amp, 50 Hz
\nPower transients: Filtered
\nDimensions: 12\u201d x 15\u201c x 13\u201c (HWD), 30.5 cm x 39.7 cm x 34.9 cm (HWD)<\/p>\n

<\/p>\n