Inheco Thermoshake AC组合式加热器/冷却器和振荡器

通过一个设备节省宝贵的台面空间，该设备可对高达500 g的负载进行精确加热、冷却和快速摇动。
组合式加热器/冷却器和振荡器提高了液体处理平台的效率和精度，适用于分子生物学、生物化学和临床化学中的许多生命科学研究应用。它们让实验室对过程有更多的控制，这有助于获得更准确和可重复的结果。通过缩短反应过程时间和减轻操作人员的工作量，它们可以帮助提高实验室的处理量。Inheco Thermoshake是第一个将加热/冷却和摇动功能结合在一起的设备。
由于其自动化夹紧技术，Thermoshake AC可以处理高达500 g的负载，并以高达3000 RPM的速度快速摇动。
一致性和准确性
Thermoshake AC可让您精确控制样品处理。定义设定温度，温度范围为4°C至70°C，均匀度和精确度为0.3 K。选择轨道振动频率，范围为200至3000 rpm。对于每一个温度和频率，您可以对每一个样品进行统一和准确的处理。
适合的
使用您喜欢的一次性Thermoshake AC。主动夹紧(自动化实验室器具夹紧)，针对不同的实验室器具使用定制的夹紧杆，让您无需调整即可使用不同的模板。这也使您能够摇动带有夹紧盖的板，并允许刺穿密封箔，同时保持板牢牢夹紧。我们提供200多种内部制造的适配器，以确保完全符合一次性物品的几何形状，或者可以定制一种适配器来满足您的需求。
易于集成
Thermoshake AC占地面积小(104毫米宽x 147毫米深x 115毫米高)，具有零定位功能，可实现舒适的机器人抓取，并且与所有主要的甲板制造商集成，实现即插即用。API可用。

Technical Specifications Thermoshake AC

Thermoshake AC
Part number	p/n 7100160 p/n 7100161
Height (bottom to contact surface)	109.9 mm [4.327 in]
Height with standard fixation pins	115.9 mm [4.563 in]
Length x width	147 mm x 104 mm [5.787 in x 4.095 in]
Temperature range	+4 °C to +70 °C [+39.2 °F to +158 °F]
Maximum temperature difference in cooling mode ∆T (=T_ambient– T_target)	25 K
Noise	Max. 42 dB(A)
Protection category	IP 20
Weight including cables	3.5 kg [7.7 lbs]

Technical information regarding shaking for all devices
Maximum load	1.0 kg
Shaker frequency weight reduce the max. speed	300 to 3000 rpm ^*2)
Shaking amplitude	2 mm [0.07874 in]
Shaking pattern	Orbital

^*2) Depending on the load, as otherwise liquid might get spilled or adapter might not be hold tight to the clamp mechanism. We recommend to test the speed you want to use with a microtiter plate and water to test the behavior first.

The use of RPM smaller 300 with the Thermoshake AC is possible. However, the shaking performance cannot be guaranteed. In case the shaking is not steady you will receive a warning “error 35 slot x (x = slot ID). This error can be ignored if no other error or warning are set at the same time. It is not Inheco´s responsibility if there is any method failure due to this low RPM.

Environmental conditions
Tolerable relative humidity:
Operation	10-80% RH ^*3 at +20 °C up to +30 °C [+68 °F to +86 °F]
Transportation and storage	10-80% RH ^*3 at +20 °C up to +30 °C [+68 °F to +86 °F]
Temperature:
Operation	+15 °C to +32 °C [+59 °F to 90 °F]
Transportation and storage	-10 °C to +60 °C [+14 °F to 140 °F] ^*3

^*3)Condensate can prevent the Shaking devices from operating properly and can damage the Thermoshake AC. Condensate should be eliminated on a daily basis or more often, for example by heating cycles in between cooling cycles.

Inheco Thermoshake AC组合式加热器、冷却器和振荡器