Horst Temperature Regulators 温度调节器 温度控制器 适用于固定用途的温度调节器
HT MC11 – Microprocessor Temperature Regulator
咨询热线 15821107090
HT MC11 是一款温度调节器，可投入运行，其温度监控独立于调节功能，采用独立的温度传感器输入和加热电流监测功能（可选）。
紧凑的铝制外壳防护等级达 IP 65，高度可配置，以及多种连接选项和功能，使其广泛应用于电加热元件的温度控制与监测。
为实现快速便捷的启动，HT MC11 出厂时已预先配置好并适配其预期用途。
Functions and features
| Housing | Powder coated aluminum, protection category IP 65 |
| Control electronics | Two-position-regulator, PID control characteristics |
| Self-optimization | Automatic determination of control parameters (Autotune) |
| Operation | Using keypad |
| Temperature supervision | Temperature supervision with second sensor input, adjustable limit value, two-pole disconnection of heating voltage |
| Connections | Heating and temperature sensor connection via multipole sockets or cable glands, connection board with spring terminals inside the housing |
| Switching power | Up to 3450 Watt (at 230 VAC), electronically switched |
| Temperature sensor | Independently selectable for regulation and supervision, Resistance sensor Pt100, NI120, Pt1000 (only for regulation), Thermocouple Fe-CuNi (L), Fe-CuNi (J), NiCr-Ni (K), PtRh-Pt (S), NiCr-NiSi (N) |
| Potential-free switching | Heating voltages 24-250 VAC (10 A or 15 A depending on model) can be switched independently from the auxiliary voltage of the control electronics. |
| Program function | 6 * ramp time + hold time |
| Softstart function | For smooth heating-up |
| Alarm relay | Potential-free normally open contact, 250 V, max. 2 A |
| Output ratio display | Shows the present calculated output ratio in 0…100 % |
| Max. output ratio limitation | Reduces the connected heating output |
| Manual output ratio mode | In case of sensor break, operation continues with last calculated output ratio |
| Manual mode | Device operates as a power controller |
| Operation lock | Available on three levels |
| Setpoints | Setpoint 1, setpoint 2 (can be activated by external contact), external setpoint (only for option „analog input/output“) |
| Second parameter set | Possible (can be activated by external contact) |
| CE marking | EMV according to 2004/108/EG; EN 61326-1, Electrical safety EN 61010-1 |
