Horst Temperature Regulators 温度调节器 温度控制器 安装导轨限位指示器
HW 17– Limit Indicator for Mounting Rails
咨询热线 15821107090
HW 17 设计用于安装在开关柜和机壳内的顶帽式导轨(TS35)上。该微处理器控制的设备可监测指定测量点的温度。可显示实际值或极限值。设备正面有两个按钮,用于调整极限值和设备设置。
根据配置不同,继电器(转换触点)可实现自锁或复位切换。自锁可设置延时。可通过按下设备上的复位键或切断电源来解除锁定。运行状态由一个 LED 指示灯显示。继电器可单极切换欧姆负载,最高可达 250 VAC、3 A,我们建议使用由 HW 17 控制的外部接触器或继电器。采用便捷的螺丝端子进行接线。
Technical Data
device type | limit value controller |
input | Pt 100 (2 or 3 wire), NiCr-Ni, Fe-CuNi (L) and (J), PtRh10-Pt (S), 0(4) … 20 mA, 0 … 10 V and other thermocouples |
limit range | -100 … 1600 °C depending on sensor type |
limit value adjustment | with buttons on the front |
display | digital temperature or limit value display, LED for operating-status indication |
output | relay (change-over contact) |
switching power | 250 V / 3 A |
protection category | IP 20 |
mounting | on 35 mm mounting rails |
dimensions | 22.5 x 75 x 105 mm |