代理Delphin Technology Expert Vibro 16振动分析仪,数据采集仪

代理Delphin Technology Expert Vibro 16振动分析仪,数据采集仪

Delphin Technology Expert Vibro产品亮点

  • 4、8、12、16个同步模拟输入,每个通道50 kHz的采样率,可通过软件选择IEPE、mV、mA传感器
  • 集成比较器用于KeyPhasor®传感器
  • 振动计中32 GB数据记录器内存
  • 4个数字输入用于频率测量,最高达1 MHz
  • 4路模拟输出用于监控
  • 8个数字输出
  • 现场读取数据的显示屏
最先进的处理器技术和极致的振动测量精度。

Delphin Expert Vibro振动器 – type4,type8,type12,type16

输入 / 输出Type 4Type 8Type 12Type 16
模拟输入(毫伏,毫安)481216
模拟输出 (毫伏, 毫安)4444
数字 / 频率输入4444
数字输出8888

Delphin Technology Expert Vibro 数据参数:

Analog inputs4, 8, 12 or 16 synchronous sampling
Sampling rate, adjustable per channel20 Hz .. 50 kHz
Usable signal rangeDC .. 20 kHz
Voltage range± 25 V
Current measuring range0 .. 20 mA / 4 .. 20 mA / free
Signal conditioning, software switchableNone, AC coupling, IEPE
Resolution/type ADC / input impedance24 bit Sigma-Delta / 4 GΩ
Dielectric withstand voltage± 100 VDC
Galvanic isolation channel to channel / channel to system / PE± 400 VDC
Measurement accuracy0.5 mV + 0.008 % from measurement value
Digital
inputs
4
Input signallow: 0 .. 1 V / high: 5 .. 100 VDC@3.5 mA
Galvanic isolation channel to channel / channel to system / PE± 400 VDC
Max. input frequency / min. pulse width1 MHz / 500 ns
Analog outputs4
Resolution16 bit
Output ranges0 .. 10 V / ± 10 V / 0 .. 20 mA / 4 … 20 mA / ± 20 mA
Galvanic isolation channel to channel / channel to system / PE± 400 VDC
Min. load / max. burden650 Ω
Digital outputs8
Max. switching voltage / current50 V / 2.5 A for 2 seconds, 250 mA continuous current
Galvanic isolation channel to channel / channel to system / PE± 400 VDC
PWM basic frequency / duty cycle5 Hz .. 10 KHz / 1:1000
Data storage
Internal / external32 GB (approx. 2,300 million measured values) / USB, NFS, CIFS, (S)FTP
Signal comditioning functions
High-pass / low-pass / bandpass filter
Cut-off frequency / filter order / filter characteristic5 .. 20 kHz / 4, 6, 8, 10 / Butterworth; Chebyshev, Bessel, Critical Damping
Analysis
Integrator / DifferentiatorSingle or double integrator / differentiator
FFT
Line number / window function / averaging100 .. 12.800 lines (zero padding up to 32k points) / von-Hann, Hamming, Flat-Top, Tukey / 2 .. 32 times
FFT typesNarrow band / wide band, envelope / demodulation, amplitude / phase spectral
Characteristic values from time signal
Maximum / minimum value, peak-to-peak value, arithm. average, RMS, max. vect. sum, air-gap, crest factor
Characteristic values from frequency spectrum
Amplitude, frequency and phase of main oscillation and any harmonics, sum value, quadratic mean (in any frequency band), value remainder
Amlitudes for various damage frequencies of rolling bearing, gear stage, planetary stage
Characteristic values on digital input
Frequency0.2 Hz .. 1 MHz
Counter64 bit, UP-Down counter, quadratur decoder

 


Related posts