DataRay WinCamD光斑分析仪,光束轮廓质量分析仪
DataRay 生产三种系列的光斑摄像机: WinCamD, BladeCam, and TaperCamD cameras. 这些CMOS和VO微波测量的相机覆盖了从190纳米到16毫米不等的不同波长。
| 规格 | 详述 |
|---|---|
| 波长 | WinCamD-LCM: 355 to 1150 nm WinCamD-LCM-1310: 355 to 1350 nm (includes long pass filter) WinCamD-LCM-TEL: 1480 to 1605 nm WinCamD-LCM-UV: 190 to 1150 nm |
| 像素数‚ H x V | 4.2 MPixel‚ 2048 x 2048 |
| 光学格式 | 1″ |
| 成像区域 | 11.3 x 11.3 mm |
| 像素尺寸 | 5.5 x 5.5 µm |
| 最小光斑 (10 pixels) | ~55 µm |
| 快门种类 | Global |
| 最大贞速率* | 60 Hz |
| 单脉冲捕捉PRR | USB 2.0: 6.3 kHz USB 3.0: 12.6 kHz |
| Signal to RMS Noise | 2,500:1 (34 dB optical / 68 dB electrical) |
| 电子快门范围 | USB 2.0: 12,600:1 (41 dB) USB 3.0: 25,000:1 (44 dB) |
| ADC | 12-bit |
| 可测量的激光源 | CW beams‚ pulsed sources; CW to 12.6 kHz with single pulse isolation Software configurable Auto-trigger‚ Synchronous & Variable Delay |
| 可测量的光斑功率 | See Charts |
| 手动光束衰减 | Includes ND-1, ND-2, and ND-4 magnetic ND filters or C-mount ND filters |
| 可显示的文件 | Line‚ 2D & 3D plots. Normalized or un-normalized. Linear or Logarithmic‚ Zoom x10 2D‚ 3D in 10‚ 32 or max. colors or grayscale Contoured display at 10 and 32 colors |
| Measured & Displayed Profile Parameters | Raw and smoothed profiles Triangular running average filter up to 10% FWHM |
| 光斑直径 | Diameter at two user set Clip levels Gaussian & ISO 11146 Second Moment beam diameters Equivalent diameter above a user defined Clip level Equivalent Slit and Knife Edge diameters |
| Beam Fits | Gaussian & Top Hat profile fit & % fit Equivalent Slit profile |
| Beam Ellipticity | Major‚ Minor & Mean diameters. Auto-orientation of axes. |
| 质心位置 | Relative and absolute Intensity Weighted Centroid and Geometric Center Beam Wander Display and Statistics |
| 测量精度 (not limited to pixel size) | 0.1 µm processing resolution for interpolated diameters. Absolute accuracy is beam profile dependent – ~1 µm accuracy is frequently achievable. Centroid accuracy is also beam dependent (as good as ±1 µ since it is arithmetically determined from all pixels above the centroid clip level). |
| 选项 | Image & profile Averaging‚ 1‚ 5‚ 10‚ 20‚ Continuous. Background Capture and Subtraction. User set rectangular Capture Block for capture User set or Auto ellipse Inclusion region with beam tracking for processing *.ojf files save all WinCamD custom settings for particular test configurations |
1″ CMOS Beam Profiler System, 190 to 1610* nm
Port-powered USB 3.0
特征
新型 MagND™ 可堆叠磁性 ND 滤光片 – 将备用滤光片存放在相机背面
355 至 1150 nm，标准 CMOS 探测器
高达 60+ FPS
4.2M 像素，2048 x 2048 像素，11.3 x 11.3 毫米有效区域
5.5微米像素
HyperCal™ – 动态噪声和基线校正软件
端口供电的USB 3.0； 灵活的螺钉锁定 3 m 电缆； 没有电源砖
12位ADC，板载微处理器
无窗传感器标准，无边缘现象
25,000:1 电子自动快门，79 µs 至 2 s
2,500:1 信噪比
全局快门、光学/TTL 触发器
隔离脉冲触发和并行捕获
现场可更换图像传感器
M² 选项 – 光束传播分析、发散、聚焦
DataRay WinCamD Beam Profiler应用领域
连续波和脉冲激光轮廓分析
激光器和基于激光的系统的现场服务
光学组装和仪器对准
光束漂移和记录
使用可用的 M2DU 平台进行 M² 测量
* 取决于型号
请注意：
该产品需要 64 位 Windows 7、8/8.1 或 10
