美国CARVER压实密度仪13MM模具、Carver 3619颗粒模、3619真空模具、13mm pellet die粉压模具
Evacuable 6mm Pellet Die Set
Evacuable 12mm Pellet Die Set
Evacuable 13mm Pellet Die Set
Evacuable 25mm Pellet Die Set
Evacuable 31mm Pellet Die Set
Evacuable 40mm Pellet Die Set
6mm直径真空模具
12mm直径真空模具
13mm直径真空模具
25mm直径真空模具
31mm直径真空模具
40mm直径真空模具
6 mm pellet die, for KBr pellets, for IR analysis, 440 SS RW 52-56, 3,500 Lbs Max
12 mm pellet die, for KBr pellets, for IR analysis, 440 SS RW 52-56, 13,000 Lbs Max
13 mm pellet die, for KBr pellets, for IR analysis, 440 SS RW 52-56, 18,000 Lbs Max
25 mm pellet die, for KBr pellets, for XRF analysis, 440 SS RW 52-56, 47,000 Lbs Max
31 mm pellet die, for KBr pellets, for XRF analysis, 440 SS RW 52-56, 60,000 Lbs Max
40 mm pellet die, for KBr pellets, for XRF analysis, 440 SS RW 52-56, 70,000 Lbs Max
在外力的压缩过程中，随着粉末的移动和变形，较大的空隙被填充，颗粒间接触面积增大，使原子间产生吸引力且颗粒间的机械楔合作用加强，从而形成具有一定密度和强度的压坯。
参照标准：
1.GBT 24533-2009 锂离子电池石墨类负极材料，附录L:粉末压实密度的测试方法，
2.GB∕T 24533-2019 锂离子电池石墨类负极材料
压实密度的计算公式：压实密度=面密度/材料的厚度，在锂离子电池设计过程中，压实密度=面密度/(极片碾压后的厚度—集流体厚度) ，单位：g/cm3。压实密度分为：负极压实密度Anode density（或称为阳极压实密度）和正极压实密度Cathode density（或称为阴极压实密度）。
我司还有6、12、13、25、31和40毫米模具可供选择，可抽真空制丸模具，用来制作IR和X-射线所需圆片或丸。
| Pellet Dies | |
| Carver 4417 | 6mm pellet die, constructed of 440 SS, 3,500 lbs. Maximum Applied Force |
| Carver 4946 | 12mm pellet die, constructed of 440 SS, 13,000 lbs. Maximum Applied Force |
| Carver 3619 | 13mm pellet die, constructed of 440 SS, 18,000 lbs. Maximum Applied Force |
| Carver 4369 | 25mm pellet die, constructed of 440 SS, 47,000 lbs. Maximum Applied Force |
| Carver 3902 | 31mm pellet die, constructed of 440 SS, 60,000 lbs. Maximum Applied Force |
| Carver 3876 | 40mm pellet die, constructed of 440 SS, 70,000 lbs. Maximum Applied Force |