IsoPharm™ Fermentation Analyzer

IsoPharm™ fermentation analyzers from LT Industries are small, rugged analyzers designed for use in fermentation production and R&D laboratories. They can be used for both laboratory and in-situ measurement of many fermentation parameters. Get protein, glucose, acetate, and many other key fermentation process parameters in real-time.

The Need for In-Situ Analysis:
The fermentation process varies greatly with organisms behaving differently and metabolizing at varying rates. With in-process measurements you can monitor the key parameters and optimize the fermentation process.
For R&D and Mass Production
For use in both R&D and mass production of fermentation based pharmaceutical products. On-line monitoring of fermentation provides fast results and can be incorporated into the process control system.

IsoPharm’s full networking capability allows data to be accessed wherever needed. OpCon-II user interface provides customized screens, result reporting, and data-logging. LTBus software allows the system to interface with plant DCS, PLC, or other process control systems using Modbus, 4-20 mA, and other protocols.

Get benefits such as:
• Dramatic reduction in time and cost to get Lab results.
• Measures multiple properties in seconds
• Online integration for continuous readings of real-time process conditions
• Optimize the process to increase yield, reduce lost batches, and reduce processing time.
• Multiplexer allows for up to 20 reactors to be measured using a single analyzer.

What parameters can be monitored by the IsoPharm Fermentation Analyzer?
• Glucose • Glucose
• Dry Cell Weight • Glutamine
• Optical Density • Ammonia
• Ethanol • Lactate
• Protein • and more
• Acetate

 

IsoPharm Fermentation Analyzer

Reliability: Designed for twenty-four hour operations without shut-down.
Spectral range: 1200 – 2400 nm (other ranges available from 400 – 2400 nm)
Scanning speed: 5 scans per second
Spectral addition: Scans may be added under computer control
Measurement modes: Reflectance, Transmittance, Transflectance
Data interval: 1 nm (1200 points over the spectral range)
Bandwidth: 10 nm
Photometric range: 5 Absorbance Units
Wavelength repeatability: 0.01 nm
Stray light: 0.1% or better
Light geometry: Optimized for minimum specular reflectance and maximal S/N
Auxiliary port: Computer controlled for alternative sampling
Possible signal output: Multiple 4-20 mA, multiple voltages, MODBUS, and more
Power: 120V, 3.5 Amp, 60Hz or 220V, 1.8 Amp, 50 Hz
Power transients: Filtered
Dimensions: 12” x 15“ x 13“ (HWD), 30.5 cm x 39.7 cm x 34.9 cm (HWD)

 

 


Related posts