Winkler AG WAMX2201-230XK004-0050G9SX 加热线

WAMX2201-230XK004-0050G9SX
Heated line for engine and dynamometer test beds ,  0.5m
Operating voltage 230 VAC; Nominal Power 225 W/m (+10%/-5%);
Max. admissible operating temperature 200°C; Nominal diameter DN 4;
Length 0,50 m; Outer diameter (OD) approx. 43 mm.
Our specifications
Heated analysis line according to the following construction:
Holding temperatures: +200°C
Resistance: +600°C (A-side/gas inlet side)
> stainless steel corrugated hose DN8 with 1-layer stainless steel braiding,
material: 1.4404
> fitting: without
> exchangeable stainless steel tube DN4 (ID4 mm/OD6 mm), material: 1.4571
with 300 mm unheated projection on both sides
> glass silk-insulated heating conductor, not moisture-protected
> sensor: thermocouple type K (NiCr-Ni)
installation: 300 mm from E-side
> thermal insulation: quartz / glass silk insulation
> outer cover: stainless steel braiding + silicone skin (red)
> additional silicone rings: "caution hot surface".
> connection and termination: stainless steel end caps (length 70 mm)
> mains and sensor cable are led out together to the centre of the hose (type 3)
LL= 2500 mm, silicone protection hose, multi-pin plug 7-pin (incl. PE/10A),
pin assignment: 1= L, 2= N, 3+4= free, 5= type K (+), 6= type K (-), 7= PE
Important note!
Due to the high gas inlet temperatures of max. +600°C, the construction of the analysis line is not moisture-protected.
I.e. when used in climatic chambers (<0°C), moisture/powertightness could occur after (power off), moisture/condensation could penetrate the insulation insulation/heating conductor after switching off (power off) and cause an electrical short circuit.
We would like to point out that the climatic chamber must be to room temperature before the analysis line is switched off, and that the that the protection against contact (regarding temperature approx. +65°C) in the area of the outer jacket, at operating temperatures of +200°C and gas inlet temperatures of up to +600°C are no longer guaranteed.
 
 

Winkler AG WAMX2201-230XK004-0050G9SX 加热线

询价采购Winkler AG WAMX2201-230XK004-0050G9SX 加热线

请微信扫描下方二维码或手动添加微信号2351992198

关于我们

每天我们通过设于欧洲、美国、香港、上海的办公室,在世界各地引进成套设备与技术,采购备品备件,将全球工业产品和技术带到中国,为中国客户提供技术咨询,产品应用和售后培训服务。原厂直接采购,一手货源,拼单发货,最低价格,最短交期,让客户进口采购变得省钱、省时、省心

Next

业务范围

我们为各行业客户提供专业的进口采购、付汇结算、报关报检、仓储物流的数字化采购解决方案。

Next

服务优势

行业领先的公司采用我们的平台和服务,通过我们全球多个办事处采购企业发展所需的物资,缩短供应链货期,以提高效率和控制成本。

Next

联系Winkler AG WAMX2201-230XK004-0050G9SX 加热线

微信扫描下方二维码或手动添加微信号2351992198