\n\tApplication:
\n\tThe laboratory device can treat one side of electrically conductive foils or plates of any wall thickness and
\n\tnon-conductive foils (polymer materials) and plates up to a wall thickness of around 2mm. Hand roll
\n\telectrodes with various web widths are available for the pre-treatment. The material which is to be treated
\n\tis placed on the earthed base plate before being rolled over with the hand roll electrode. The discharge
\n\ttakes place between both of the electrodes on the surface of the material. Moulded parts can also be
\n\ttreated after the hand roll electrode has been replaced with a rigid electrode which can be blank or
\n\tinsulated.\n<\/p>\n
\n\tDesign:
\n\tThe device comprises a semi-conductor generator with an integrated transformer for high-voltage
\n\tgeneration, the hand roll electrode (standard working width 200mm), the earthed ground plate (standard
\n\tdimension 400 x 400mm), power cable and a hand or foot-operated switch for the activation of the Corona
\n\tdischarge. The output (intensity of the Corona discharge) can be adjusted at a potentiometer and read off a
\n\tdisplay. The hand roll electrode is fitted with an ozone suction connection which can also be used to feed the
\n\tprocess gas.\n<\/p>\n
\n\tTechnical Data:
\n\tLine supply: 230 V, 50\/60 Hz, 1000 VA
\n\tTreatment width: 200mm or 300mm or 400mm
\n\tStandard hose length: 1.0 m
\n\tGenerator dimensions (W x D x H): 470 x 530 x 210 mm
\n\tWeight: 23kg<\/p>\n