Tekuwa GmbH Electro-pneumatic Cutting Machine Model SC 30 SERVO-CUT3 气动切割机
Cutting machine with high length precision and high production speed equipped with
parallel driven belt-feed supported by three bearings.
Application
For cutting cables of a Ø of up to 15mm, flat cables of a width of up to 30mm,
synthetic and insulation tubes, lighting wires as well as other thin problematic
materials.
Control Unit and programm comfort:
- 16 Bit-microcontroller of a memory capacity of 128 MB, AC-servo drive
- The new electronic unit is operated by a plastic-foil keyboard equipped with a display
of 4 lines and not sensitive to dirt .
It's optionally possible to communicate pieces of loop information to other machines
integrated into a production line via CAN Bus System.
-
The following values can be item-specifically programmed:
Number of pieces, batch quantity, length, length correction, cutting time,
batch quantity waiting time, acceleration and braking down of
the belt feed, maximum speed 0 - approx. 6m /sec.
(depending on the design and the material).
-
The software includes item or order processing such as harness production of
up to 100 single items.
The installed compact flash card with a memory capacity of 128 MB permits
memorizing production programmes of up to 30.000 .
-
The machine is equipped with automatic system termination.
Electrical Connexions:
The following electrical exits are standard fittings of the machine:
- De-reeler DR 200E
- Pre-feeders such as PF121, PF250, PF A
- Coil machine AW2T
- Stacker
Feeding
The belt feed supported by three bearings protects the material while being
transported.
Pneumatic opening, clamping pressure adjustable by pressure regulator with display.
Depending on the material there are different belts available.
Cutting Unit
pneumatic operation,
Cutting and counter blades as well as blade guides made of high-grade and tempered
HSS-tool steel.
Other blades are optionally available such as hard metal, pointed or razor blades,
depending on the material such as lighting wires, hard tubes, etc.
Technical Data:
- maximum speed of belt-feed:
0 - approx. 3 m/s
depends on material
- Diameter:
Ø 15mm round material /
flat material up to 30mm
- length
1 - 999 999 mm
- tolerance
0.01 up 1% depending
on the material and length
- capacity
up to 30.000 programmes
- Noise emission:
less than 75 dBa
- interface
Standard for
Tekuwa machines
option RS 232
- Operating voltage:
220/230 volt AC
- Air pressure:
6 - 10 bar
- Cutting Capacity:
up to 20.000 cycles per hour,
depends on material and length
(cutting force approx. 750N)
Dimensions:
Length/Width/height:
375/ 420/ 305
Weight:
approx. 30 kg
The machine is delivered with CE-certificate
询价采购Tekuwa GmbH Electro-pneumatic Cutting Machine Model SC 30 SERVO-CUT3 气动切割机
请用微信扫描下方二维码或手动添加微信号2351992198
