SPEX CertiPrep SPEX 8000M Mixer/Mill 球磨机
基本参数(Parameter)
1）尺寸Diameter： 48cm(H) 36cm (W) 46cm(D)
2) 重量Mass：35kg (76lbs)
3）转速Motor：1⁄3 HP, 1725 RPM @ 60 Hz or 1425 RPM @ 50 Hz
4）电源Power Supply:110/220 VAC,60HZ/50HZ
5) 夹具运行Clamp Movement：前后59mm，左右25mm 59mm back-and-forth, 25 mm side-to-side
6) 夹具运行速率Clamp speed in complete back-and-forth cycles per minute:1060/875次/分钟 1060
(115 V/60 Hz) or 875 (230 V/50 Hz)
1）图8式运动模式：集高能研磨、机械合金化和纳米研磨技术三体合一 Figure eight motion,it can
be utilized for grind、mechanical alloying and nanomilling.
2）样本范围：0.2 -10克/瓶,或混合粉末60毫升/次 Sample sizes range from 0.2-10 grams per vial for
grinding,and up to 60ml for blending powders or mixing emulsions.
3）电子定时器：可显示程序运行时间和剩余时间，运行时间可扩展 Electronic timer that displays
the programmed running time and the time remaining while the mill is running.extended run time chip
also available.
4）安全功能：包括一个安全联锁装置、电机配备热过载保护器，CE标志 Safety features include a
safety interlock，the motor is equipped with a thermal overload protector and it is CE compliant.
5）专业化研磨瓶及研磨球材质：淬硬钢、不锈钢、硬质合金、氧化铝陶瓷,氧化锆陶瓷、氮化硅
和玛瑙 Sseveral vials are available in hardened steel,stainless steel,tungsten carbide,alumina
ceramic,zirconia ceramic,silicon nitride and agate.
6）冷却系统：防止电动机和夹具过热 Forced air cooling system keeps the motor and clamp cool during longer
grinding times to revent overheating.
7）环轴承的电动机和密封夹,多年来操作系统操作,传动皮带是非常耐用,很少需要调整 Built to be
low maintenance with ring bearings in the motor and clamp that are sealed for years os operation,the
drive belt is extremely durable and rarely needs adjustment.
包含Include：
8000M主机及附件Selection criteria and selection of accessories:
1）研磨机主机 Host computer.
2) 电源线 Power cord.
3) 操作手册Instruction manual.
II. 8007 Stainless Steel Vial Set 不锈钢罐
III. 8007B Stainless Steel Ball Set, 2 x 1/2 in. (12.7 mm) and 4 x 1/4 in. (6.35 mm) 不锈钢球
SPEX CertiPrep SPEX 8000M Mixer/Mill 球磨机
询价采购SPEX CertiPrep SPEX 8000M Mixer/Mill 球磨机
请微信扫描下方二维码或手动添加微信号2351992198
