Steel tank / vacuum max. 1.7 l

Steel tank / vacuum max. 1.7 l 钢罐/真空最大1.7升 Characteristics 特点 Material: 材质： steel 钢 Product application: 产品应用： vacuum 真空 Capacity: 容量： Min.: 0 m³ (0 ft³) 分钟：0米（0英尺³）³ Max.: 1.7 m³ (60.03 ft³) 最大：1.7米（60.03英尺³）³ Description 描述 ANVER's vacuum reservoir may be used as an inline or single ported auxiliary tank to facilitate faster attach. When, it is used inline on the loads between non-porous to semi-porous, it adds to safety in situations of power failure, by increasing the level of vacuum in the system. This facilitates more time to lower load, safely. Anver的真空罐可作为内联或单端口辅助油箱以便更快的连接。当，它被用于在非多孔性之间的负载上的半多孔性，它增加了安全性的情况下，电源故障，通过增加在系统中的真空的水平。这有利于更多的时间来降低负载，安全地。 When, used as auxiliary tank, it uses ing special valve circuits to increase the speed of attachment significantly, after seating of suction cup on the load and activation of the attach mode. 当作为辅助槽时，采用特殊的阀回路，增加了对附件的速度，在吸杯后的负载和激活的附加模式。 ANVER's large vacuum generators series come with built in reservoirs made up of 11GAend caps and 14GA steel tubing welded to ANSI/AWS D14.1. It has volume of 100 cubic inches or 1639cc. Easy integration into vacuum system is facilitated by the 3/8-NPT ports on both ends. It has a mounting bracket of 3/8" x 1/2". Anver的大型真空发生器系列配备了由11gaend帽和14ga钢管焊接ANSI/AWS d14.1水库。它具有100立方英寸或1639cc体积。易于集成到真空系统是由两端的3 / 8-npt港口便利。它有一个安装支架为3 / 8“×2 / 1”。 Steel tank / vacuum max. 1.7 l 钢罐/真空最大1.7升