Giugni S.R.L printing machine Miniflex 544

max 100mm printing width
 RIGHT (DX) version, as requested, according to the layout of the production line
 sleeve system with air mandrel, for easy and quick change of the repeat and/or the print plate
 printing repeats ranging from 230mm to 475mm, repeats depending on the sleeve circumference (the
300mm print repeat sleeve – 290+10mm – supplied with the equipment)
 working speed: up to 300mpm
 Vertical arrangement, vertical web direction (upwards recommended)
 Flexographic inking by means of 100lines/cm V13gr/sqm laser engraved ceramic Anilox roller
(available other engravings on demand) and Doctor blade chamber
 Independent motorization and GEARLESS system by means of brushless electric motors from
LENZE, Gearboxes and drives to control the speed of the nip roller, of the print roller, of the Anilox roller
and of the counter pressure roller
one axis control device to control the axes synchronisation and the printing accuracy and one encoder
to read the speed of the web (it has to be connected to the rotary die-cut) and to synchronize the print to
the final product
 Print plate 2.84mm thickness, fitting by 0.50mm backing tape
 Micrometrical device controlling the distance between the counter pressure roll, the stereo roll and the
Anilox roller
 Solenoid valves, LENZE HMI, LENZE PLC supplied
 Programming software supplied
 The Doctor blade chamber and the tray collecting the ink from the Doctor blade chamber are Teflon lined
(Teflon inner coated) to make easier the cleaning procedures
 Automatic cleaning system for the counter pressure roller, made of a Doctor blade chamber system,
cleaning water feeding system included in the Work & Wash unit (see below)
 complete with electro-pneumatic control
 complete with control panel
 pneumatic feeding: 0,6 mpa
 400V-50Hz electric power supply, 3 ph + Neutral + Ground
 Total power required: about Kw 30
 Ford cup no.4 included, in order to control by hand the ink viscosity