Winkler AG ATEX-heated analysis line 加热束线 WEX80203-230ZE016-080003T3

ATEX-heated analysis line for use in hazardous areas of zone 1/2 (gas)  and zone 21/22 (dust); 

system certified version with EX Type Examination Certificate 

Operating voltage 230 VAC; Nominal Power 150 W/m (+10%/-5%);  

Max. admissible operating temperature 200°C; Sensor 2 x Pt100 ATEX; Nominal diameter DN 16; Length 8,00 m;  

Connecting cable with ferrules LL=2 m;  

Outer diameter (OD) approx. 55/60 mm; Temperature class T3 

Our specification: 

Heated line according to the following structure: 

PTFE hose DN16 (20x1 mm) with stainless steel braiding; antistatic Fittings on both sides stainless-steel tubes-stubs RSL OD20/LA25 mm;  Mat. 1.4571; 

PTFE insulated heating cable, moisture protected with protective braiding; 2 x EX-i-Pt100, 3-wire, installation 300 mm from E-connection 

Thermal insulation with multilayer thermal fleece; 

Protective cover: polyamide corrugated hose (PA12), antistatic; Electrical connection side and the opposite ending side with silicone caps, antistatic; 

Power and sensor cables are brought out separated;