Pine Truth Limited Laboratory dissolver DISPERMAT LC110-12 分散机 D30/LC110-12
M o t o r
three-phase A.C. motor convection cooled
‒ power supply: 220V, 50/60 Hz German style plug
‒ motor power:1.1kW
‒ speed: 0 - 12.000 rpm
‒ noise level: max. 75 dB (A) without product with a
max. speed
‒ torque:1.8 Nm
‒ speed control by frequency converter
‒ complete motor protection by means of installed
temperature sensors. When motor is overloaded, the
unit is switched off automatically
‒ dissolver shaft with double bearing
S t a n d
Stand BK2G with counter weight
‒ heavy base with acid resistant paint
‒ stand column made of steel with integrated linear
guidance
‒ sheet metal sheating made of stainless steel
‒ stand height: max. 1.400 mm
‒ elevation adjustment by means of counterweight and
chain drive
‒ with adjustable device which prevents the dissolver
shaft touching the table accidentally and enables the
adjusting of a constant distance between bottom of
the dispersion container/dispersion impeller
C o n t r o l b o x
‒ power supply: 400 VAC, 50 Hz 3phase five wire
‒ separate control box for speed adjustment
‒ progressively adjustable speed through a turning
knob
‒ momentum transmitter for a fast and dynamic speed
adjustment
‒ speed adjustment by means of frequency converter;
the PID controller keeps the speed constant also with
changing load
‒ digital indication of speed
‒ timer function
S a f e t y - d e v i c e
according to EC machinery directive 2006/42/EC
‒ In order to minimise the risk of injuries with running
dissolver discs, it is required by law that every
dissolver must have a suitable safety device.
‒ This safety device consists of:
‒ removable telescope-shaft protection pipe, made of
stainless steel
‒ Because of its construction the dispersion impeller
can only function in a vertical position.
‒ height adjustable central container clamping
system with two clamping arms operated by a hand
wheel with screw adjustment stainless steel cover
‒ container Ø: 100 - 370 mm
‒ safety limit switch, easy adjustment to different
container heights. When moving up the dissolver the
motor is automatically stopped, and can only be
switched on again when the impeller blade is located
centrically in the dispersion container.
‒ safety limit switch, integrated in the central container
clamping system, clamping pressure dependent. The
motor can only be started, if the dispersion container
is fixed.
including one heavy-duty dispersion impeller, 80 mm
Pine Truth Limited Laboratory dissolver DISPERMAT LC110-12 分散机 D30/LC110-12
询价采购Pine Truth Limited Laboratory dissolver DISPERMAT
请微信扫描下方二维码或手动添加微信号2351992198>