PSL Systemtechnik GmbH Inlet Pressure Facilities P

PSL Systemtechnik GmbH Inlet Pressure Facilities P118-0002

Additional installation for use with extremely high viscosity and outgassing samples

Scope of delivery for "plug and play"
⦁ Pneumatic suction support
⦁ Pneumatic process back pressure control
⦁ Safety container
⦁ Sample pre-filter unit
⦁ Set of pressure-proofed glassware (replacement of glassware from basic system)

Technical data
⦁ Pneumatic loop cleaning: 6 bar (87 psi)
⦁ Absolute sample pressure: max. 1.5 bar (21 psi)
⦁ Pump head heating: max. 120 °C (248 °F)

Requirements
⦁ 6 .. 10 bar (87 .. 145 psi) compressed-air supply low pressure nitrogen

⦁ Low volume test loop for analysis of wax deposit, paraffin crystallization and emulsions in pipelines and tubing ⦁ For shear dependent screening of wax inhibitors, wax dissolvers and pour point depressants / viscosity improvers and emulsions ⦁ Fully automated by computer run, manual and automatic test runs, temperature ramps, shear ramps, step-size and closed cycle ramps etc., user-defined test lengths ⦁ Real-time charts display raw data of dynamic process for rapidly growing deposits (non-filtered) and Fully automated flow loop for the analysis of flow related properties:

⦁ Low volume test loop for analysis of wax deposit, paraffin crystallization and emulsions in pipelines and tubing ⦁ For shear dependent screening of wax inhibitors, wax dissolvers and pour point depressants / viscosity improvers and emulsions ⦁ Fully automated by computer run, manual and automatic test runs, temperature ramps, shear ramps, step-size and closed cycle ramps etc., user-defined test lengths ⦁ Real-time charts display raw data of dynamic process for rapidly growing deposits (non-filtered) and

PSL Systemtechnik GmbH Inlet Pressure Facilities P118-0002