Flow Systems, Inc. Air Flow Test Stand 测漏仪 BLTS – 2.5 Gen
Specifications
Flow Modes: Pressure or Suction.
Flow Range: 4.7 to 165 SLPS (10 to 350 SCFM)
Accuracy: Estimated to be better than +/-2% of reading with traceability to NIST standards.
Repeatability: Estimated to be better than +/-0.5% as defined as 2 standard deviations divided by the mean of 20 identical samples.
Vehicle Pressure Range: 124.5 to 249 Pa (0.5 to 1.0 In. H2O @ 4°C) (13 to 25 mm H2O @ 4°C)
Accuracy: +/- 0.4% to +/- 0.2% of reading with traceability to NIST standards.
Instrumentation: Measurement and compensation for ambient conditions of pressure, temperature and humidity.
Cycle Time: 30 to 60 seconds depending on percent of maximum capacity.
Connecting Hardware from Test Stand to Vehicle:
Air Flow: 6 inch diameter hose 20 feet long.
Pressure Line: ¼” OD poly tube 20 feet long.
Flow Check Audit Plenum and set of (6) Orifice Plates with Characterization & (1) Leak Plate.
BLTS-DataSoft
Custom LabVIEW software for MS Windows for:
Improved Vehicle Pressure Set-Point Adjustment.
On-the-Fly Correction of raw test data to Nominal Conditions based on Ambient Conditions.
BLTS-DataSoft continued:
On-the-Fly Analysis of Check Orifice test data.
On-the-Fly Change between unit systems
(SI & Eng.).
Laptop
Specifications: Windows 7 Professional, 2.0 GB DDR2-800 SDRAM, 250 GB Hard Drive. Intel® Core™ 2 Duo P8600 (2.40GHz),14 inch Widescreen LCD Display (or equal).
Factory Acceptance Testing (FAT): Final Test Stand setup and training at FLOW SYSTEMS facility for 1 day is included. Customer is responsible for all travel and subsistence expenses.
• Crate: Reusable with Fold-Down Ramp for local transport. Constructed from Heat-Treated wood.
Flow Systems, Inc. Air Flow Test Stand 测漏仪 BLTS – 2.5 Gen
询价采购Flow Systems, Inc. Air Flow Test Stand 测漏仪 BLTS –
请微信扫描下方二维码或手动添加微信号2351992198
