FBF ITALIA SRL Homogenizer 均质机 FBF1002

Fit for the processing of ............................. : Dairy products

Viscosity at the process temperature ......... : < 500 cPs

Maximum dimensions of the particles ........ : < 500 micron

Maximum working temperature: ................ : < 90° C

Capacity ..................................................... : Fixed, 200 LPH

Homogenizing type .................................... : Double stage

Homogenizing pressure 1ststage .............. : Adjustable, up to 200 bar (20 Mpa – 2900 Psi)

Homogenizing pressure 2ndstage ............. : Adjustable, up to 50 bar (5 Mpa – 725 Psi)

Total homogenizing pressure ................. : Maximum 200 bar (20 Mpa – 2900 Psi)

Maximum counter-pressure on outlet ........ : Up to 10 bar

Feeding pressure requested ...................... : Minimum 2 bar

Main motor ................................................. : 2,2 kW, 4 poles, Is.Cl. F, IP55

Voltage and frequency ............................... : 3 x 400 Vac, 50 Hz (inform us if different)

Auxiliary circuits ......................................... : 24 Vac, 50 Hz

Execution ................................................... : Sanitary

Version ...................................................... : Abrasive

Plungers .................................................... : No. 02, in AISI 316 with special “DLC-PVD” plating

Pistons sizes/rpm ...................................... : Pistons Ø 18 mm – 168 rpm

Lubrication of mechanical organs .............. : Oil splash type, in oil bath

Characteristics of cooling water ................. : Pressure 2÷6 bar, filtered/no impurities,

temperature <22° C, hardness <17°f (10°d)

Water consumption .................................... : 50 ÷ 70 litres/hour about

Characteristics of compressed air ............. : Minimum 5 bar, clean/dried, temperature <40° C

Compressed air consumption .................... : 0,3 Nl/minute about

Inlet and outlet product unions .................. : DN type (on request SMS or TRI-CLAMP)

Maximum cleaning temperature ................ : < 90° C

Maximum sterilization temperature ............ : < 145° C

Cleaning/sterilization time .......................... : 30 minutes

Capacity cleaning/sterilisation (water) ....... : Equal to the production

Environmental conditions........................... : Temperature +3/+40° C, relative humidity 90%

max., altitude 1.000 m above sea level max.